A glazing masking set for the Lightning F. Mk.6 in 1:72 scale from the Dead Design brand. The cut shapes follow the frame of the cabin, so it can be sprayed without the paint flowing onto the clear area.
Responsibility details are not available.
A set of cut masks of the Dead Design brand for the glazing of the cabin of a model of the British interceptor Lightning F. Mk.6 in 1:72 scale. The masks are stuck onto the clear part in such a way that only the frame stays uncovered, that is sprayed in the color of the airframe and once it has dried the masks are taken off.
The frame of a cabin is conspicuous on a model and at the same time very thankless. A brush drawn along an edge always looks uncertain from close up, the line widens and narrows, and in 1:72 scale every deviation is noticed. A cut shape solves this problem by taking the accuracy over from the modeler - the boundary is given by the outline of the mask, not by the steadiness of the hand, and it comes out the same on both sides of the cabin.
First wash the clear part and let it dry, because grease from the fingers is the most frequent cause of a mask not holding. Transfer the shapes with tweezers and press them down around the whole perimeter, above all in the curves. Then spray the shade of the interior of the frame, over it the color of the airframe, and take the mask off only when the finish is dry - best of all with a pull at an angle, not straight up. Do not then polish the clear areas coarsely; it is enough to rid them of dust.
The Lightning F. Mk.6 was a version of the British supersonic interceptor, a machine with the characteristic arrangement of two engines one above the other and a strongly swept wing. It was built above all for a rapid climb to altitude and for action against intruders into the airspace.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!