1:72 Yokosuka K5Y2 Willow

A plastic model of the Japanese Yokosuka K5Y2 trainer in 1:72 scale from AZ model. The kit captures the floatplane version of the biplane, which the Allied classification listed under the name Willow.

Scale1:72
Manufacturer AZ model
Product EAN8591111870955

Responsibility details are not available.

13.96 €
11.54 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Yokosuka K5Y2 Willow in 1:72 scale from AZ model

This plastic kit of the Yokosuka K5Y2 in 1:72 scale from the Czech maker AZ model captures the floatplane version of the Japanese trainer biplane, which the Allied classification designated by the name Willow. The model is supplied unassembled and unpainted.

A biplane on floats is one of those subjects that do not get lost on the shelf. The struts, the bracing and the float undercarriage give the finished model a striking shape even in the small scale.

The real subject

The Yokosuka K5Y was a two-seat trainer biplane of the Imperial Japanese Navy Air Service, used for the advanced training of pilots. It appeared in the first half of the 1930s and was built in large numbers by several companies. Because of the conspicuous orange-yellow finish of the training aircraft it was nicknamed the red dragonfly. The K5Y2 version is the floatplane, that is, the one meant to take off from and land on water, and it differs from the land version in its undercarriage and its balance.

Building and painting tips

On a biplane everything depends on patience when gluing the upper wing. Try the struts dry first, glue them only in pairs and let each joint set properly before you add the next. Use liquid cement for plastic applied with a fine brush, as any excess would run across the small surfaces and spoil them. It is advisable to assemble and sand the floats before attaching them to the fuselage. Paint the cockpit and the interior before closing the fuselage. Apply primer before painting, as it evens out the surface and reveals any remaining gaps. The conspicuous training finish is sprayed with an airbrush in thin coats, because a saturated yellow-orange shade needs an even base. Spray gloss varnish before the decals and a matte coat once they have dried.

Who the model is for

  • Collectors of Japanese aircraft in 1:72 scale
  • Modelers who like biplanes and floatplanes
  • Builders with some experience, since the struts make it no first-time model
  • Anyone looking for an unusual subject away from the familiar fighters

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The K5Y2 is the floatplane version meant to operate from water; instead of a wheeled undercarriage it has floats.

Rather for a modeler with some practice. A biplane with struts and floats calls for accurate fitting and a calm hand when gluing.

The exact contents of the package and the number of color variants are given on the box and in the instructions inside.

It is the name under which the aircraft was listed in the Allied classification of Japanese equipment.

Last seen

AZ modelAZ78821:72

1:72 Yokosuka K5Y2 Willow

A plastic model of the Japanese Yokosuka K5Y2 trainer in 1:72 scale from AZ model. The kit captures the floatplane version of the biplane, which the Allied classification listed under the name Willow.
In stock
13.96 €
3DF3DF1072361:72

1:72 AN/M2 Browning for B-24H

A 3D-printed set of AN/M2 12.7 mm machine guns for the 1:72 B-24 bomber replaces the plastic weapons with fine, accurate detail.
In stock
9.16 €
FujimiFU722921:72

1:72 F-35B LIGHTNING II

Fujimi 1:72 F-35B Lightning II is a plastic kit of the single-seat combat aircraft in the version with short takeoff and vertical landing capability.
In stock
32.76 €
1:48 Sukhoi Su-27UB-25 %Stock ClearanceFavorite
EduardBIG492741:48

1:48 Sukhoi Su-27UB

The Sukhoi Su-27UB in 1:48 scale is a combined Big Ed accessory package from Eduard, cut for the two-seat combat trainer version of the aircraft.
Last one!of 3
32.12 €24.08 € You save 8.04 €
1:48 Bf 109K-4 cockpit PRINT-25 %Stock ClearanceFavorite
EduardED6489041:48

1:48 Bf 109K-4 cockpit PRINT

A cockpit for the Messerschmitt Bf 109K-4 in 1:48 scale from Eduard's PRINT line. An add-on set for a kit, not an aircraft model in its own right.
2 leftof 5
23 €17.24 € You save 5.76 €
Print ScalePRSC481941:48

1:48 Boeing-Vertol 107 Part 1

A decal sheet in 1:48 scale for the twin-rotor Boeing Vertol 107 helicopter in Canadian service. The sheet covers the rescue version as well as the transport one.
In stock
11.96 €
Special HobbyP480111:48

1:48 MG 15 Machine gun 1/48 (2 pcs.)

A resin MG 15 machine gun in 1:48 scale (2 pieces) is a detail accessory for aircraft models that replaces the less faithful parts from the box.
In stock
7.56 €
ŘOP o.s.S700/0231:700

1:700 Flottentender Hela Germany 1941

Flottentender Hela 1941 (1:700) is a resin kit of a German fleet tender (a command ship), intended for experienced modelers.
In stock
34.36 €
Mirage HobbyMIR100056

Brush "3" Classic Series 2 (Orange label)

Brush 3 Classic Series 2 (Orange label) is a modeling brush of size 3 from the Classic Series 2 line, which Mirage Hobby distinguishes with an orange label. It is a universal size for details and smaller surfaces alike.
In stock
2.76 €
1:72 Martin B-57 Canberra type 2 wheels set-25 %Stock ClearanceFavorite
ReskitRS72-01181:72

1:72 Martin B-57 Canberra type 2 wheels set

The resin wheel set Reskit 1:72 Martin B-57 Canberra, type 2 offers a second version of the wheels for the American license-built Canberra in place of the plastic parts from the kit.
3 leftof 6
7.96 €5.96 € You save 2 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.