1.1 mm, an Allen drive, a sunken cone head. The second to last step of the scale offered.
Responsibility details are not available.
The second to last size of the scale is intended where a joint already carries a real load and the real subject makes it plain. On a motorcycle that means the mounting of the rear swingarm, the screws of the engine mounts or the clamp of the handlebars. In 1:12 scale this head works out at 13.2 mm of real width, which is the key for an M8; on a 1:9 build at just under a centimeter, that is a strong M6.
The nearest larger size adds only a tenth, but the area of the head grows by more than a fifth, because it grows with the square of the diameter. That is exactly why it pays to reach for this step wherever you want a massive impression but do not want the head to take optical charge of the part. It is a difference that works on a finished model rather subconsciously than conspicuously.
The advantage of the coarser steps is practical: the element is held well in tweezers, it does not slip and it does not vanish in the carpet. The hole can be drilled in a pin vise with no risk of breaking the bit, and the countersink for the cone is comfortable to make even with a larger bit turned a few times in the fingers.
If you are building a whole machine, we recommend having the neighboring steps at hand too. The difference in size between a wheel suspension and an alternator cover is distinct on the real subject, and a model with the same diameter everywhere looks flat regardless of the quality of the paint.
With the coarser sizes the position of the hexagon is clearly legible, so it pays to control it. On a real machine the recesses tend to be turned at random, because nobody aligns them. A model where they are all evened into one row therefore looks, paradoxically, less genuine than one where the orientation differs slightly from piece to piece.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!