A plastic model of a piloted machine on science fiction themes, carried under the designation eEXM-30 and the name Espossito Alpha.
Responsibility details are not available.
This is a plastic model on space and science fiction themes. The name carries it under the type designation eEXM-30 and the name Espossito Alpha, that is, the way the machine is designated within its own series. The scale, the number of parts and the contents of the package are on the box and in the manufacturer's instructions.
Science fiction series work with type designations much as real equipment does: the letter abbreviation determines the family of machines and the number after it the particular type. The proper name then distinguishes the individual finish within the same family. Neighboring numbers in the same range therefore belong to other machines, not to color variants of the same model, and they can be combined with one another only as far as the instructions allow.
Dry-fit the parts first, so that you know where a joint will run and where sanding will be needed. Cut the excess material away with a sharp blade a little away from the part and sand the rest carefully, so that the edge is preserved. Put the small parts aside in a dish. If you want to paint the model, wash and degrease the parts beforehand and work in thin coats; on the intricate surface of a robot machine a heavy coat shows at once. The build sequence and any movable joints are dealt with in the manufacturer's instructions; on character machines it pays to leave the smallest accessories until the end, when the model no longer has to be turned over.
Paints, glue and tools are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!