1:32 NAVY inboard pylons for McDonnell F-4 Phantom (2 pcs) (F-4B, F-4J, F-4N, F-4S, RF-4B)

Reskit 1:32 inboard pylons for the F-4 Phantom, Navy form

An add-on set of inboard underwing pylons for the McDonnell F-4 Phantom in 1:32 scale from the brand Reskit, in the form matching the machines of the US Navy and the Marine Corps. It is not an aircraft kit but a replacement part for a model under construction. The name lists the versions F-4B, F-4J, F-4N, F-4S and the reconnaissance RF-4B for this set.

The real subject

The inboard underwing pylons of the Phantom were the strongest point for carrying loads away from the fuselage. They took large drop tanks, multiple ejector racks for bombs and heavy guided missiles too, so they had to be sturdier than the outboard pair. That is exactly why they differ in shape, in the construction of the brackets and in the layout of the attachment points. The Navy and Air Force versions of the Phantom differ in the details of the pylons, and in 1:32 scale that shows clearly on a model. The reconnaissance RF-4B was a Marine Corps machine and the name of this set states it expressly.

Usage tips

• Check the position and the angle dry, and only then glue the parts on for good.
• Level the seating face on the wing so that the pylon does not lift anywhere.
• Wash and degrease the surface before painting, then lay on a primer.
• If you plan heavier stores, load the joint carefully once it has set and check it.

Who the set is for

• Builders of Navy Phantoms in 1:32 scale.
• Modelers who are bothered by the simplified shapes of the pylons on a large model.
• Those who build the full weapons configuration including drop tanks.