AIM-7F High Vis Sparrow III (4 pcs, 1:48) is a 3D-printed resin set of four air-to-air missiles in conspicuous markings: an accessory for arming an aircraft model in detail, not a kit of its own.
Responsibility details are not available.
A set of four 3D-printed resin AIM-7F Sparrow III air-to-air missiles in 1:48 scale from Reskit. This is not an aircraft model but an accessory with which you fill the pylons and stores stations of your model. The High Vis finish corresponds to the conspicuous markings with a white body and colored bands typical of training and early service rounds.
The AIM-7F is an American semi-active radar-guided medium-range air-to-air missile. The F version brought fully solid-state electronics, a more powerful motor section and a longer reach than the earlier Sparrows. It was carried by a range of machines, among them the F-4 Phantom II, F-14 Tomcat, F-15 Eagle, F-16 and F/A-18.
First wash the parts in lukewarm soapy water, separate them carefully from the print supports and clean the surfaces up. Glue them with cyanoacrylate glue (super glue). Apply a primer before painting; masking and an airbrush work well for the bands and markings. Protect your airways when sanding resin.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
