1:48 K-36D-3,5 ejection seats, 2 pcs (for Su-30 Family, Su-34) (All kits)

K-36D-3.5 ejection seats, 2 pcs, 1:48 (Quinta Studio)

A set of two 3D-printed resin K-36D-3.5 ejection seats in 1:48 scale from Quinta Studio. It is not a model but a detail accessory with which you replace the simplified seats from a plastic kit with a faithful replica of the modern Russian ejection seat. The K-36D-3.5 seat is used in the modern machines of the Su-30, Su-34 and Su-35 families, so the set suits the two-seat and multi-seat cockpits of these aircraft. The high resolution of the 3D print captures the fine features of the seat, of the mechanism and of the belts.

What the set offers

• Two 3D-printed K-36D-3.5 ejection seats
• High print resolution with fine detail of the mechanism and the belts
• Suitable for Su-30, Su-34 and Su-35 models
• Raises the realism of the cockpit markedly over the parts from the kit

Usage tips

Separate the parts carefully from the print supports and wash them if need be. Glue with cyanoacrylate glue (super glue); protect your airways when sanding resin. Paint and shade the seats separately, pick the belts out and fit them into the finished cockpit at the end.

Who the set is for

• Modelers of modern Russian jets in 1:48 scale
• Builders of machines of the Su-30, Su-34 and Su-35 families
• More experienced modelers working with resin and cyanoacrylate glue

The set is only an accessory for a plastic kit, which it does not contain. Glue and paints are not included in the package.