1:48 Mirage 2000 wheel bay plugs (for Kinetic)

Omask 1:48 Mirage 2000 wheel bay plugs (for the Kinetic kit) is a set of shaped plugs of flexible foam that seal the landing gear bays while a model is being sprayed. It is not a kit but a masking accessory to the model from Kinetic.

Scale1:48
Manufacturer Omask
Product EAN8591111359341

Responsibility details are not available.

3.20 €
2.64 € without VAT
16 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Omask 1:48 Mirage 2000 wheel bay plugs (for Kinetic)

A set of shaped plugs of flexible foam for masking the landing gear bays on a model of the Dassault Mirage 2000 in 1:48 scale from the Kinetic kit. It is NOT an airplane kit; it is a masking accessory and you have to have the model yourself. The plugs follow the shape of the bays of this particular kit and will not fit a kit from another manufacturer or another scale.

What the plugs are for

A landing gear bay is a deep cavity that a modeler paints first. Before spraying the outside of the model it has to be masked, otherwise the painstakingly painted interior is ruined by overspray. Masking a deep, irregular cavity with tape and cotton wool is a nuisance and does not seal well anyway. A plug is a shaped part that drops exactly into the bay and seals it: it goes in, the model is sprayed and once the paint has dried the plug comes out. It also protects the bay during sanding and from settled dust.

The plugs are made of flexible foam. Foam compresses inside the bay and seals itself, so it does not have to fit to hundredths of a millimeter as a hard 3D-printed insert would; it holds without glue and pulls out easily.

The real subject

The Dassault Mirage 2000 is a French single-engine fighter with a delta wing, that is a triangular wing with no horizontal tail surfaces. It came about as the successor to the older French deltas and became the backbone of the French fighter force as well as an export success. The delta configuration has a practical consequence for the modeler: the arrangement of the landing gear and its bays is different from a conventional aircraft with tailplanes, as the bays are placed and shaped differently, and that is why they call for their own plugs shaped to suit.

Who the set is for

  • For modelers building the Mirage 2000 in 1:48 scale from the Kinetic kit
  • For anyone who sprays with an airbrush and wants painted bays protected
  • For those who are tired of stopping deep bays up with tape and cotton wool
  • As protection for the bays during sanding and filling, and from dust

This is not a kit. The package contains only the landing gear bay plugs; the model, paints and glue are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking accessory, a set of plugs for the landing gear bays. You have to have the Mirage 2000 kit in 1:48 scale; it is not included in the package.

No. The set is shaped for the bays of the Kinetic kit in 1:48 scale. A kit from another manufacturer has bays of a different shape and size and the plug will not fit.

A delta wing with no horizontal tail surfaces changes both the arrangement and the shape of the landing gear bays. The plugs are therefore made to suit a particular type and a particular kit rather than in general.

Yes. Flexible foam compresses once inserted, seals even irregular edges and holds without glue. Once the paint has dried you simply take it out.

Last seen

OmaskOMK7481251:48

1:48 Mirage 2000 wheel bay plugs (for Kinetic)

Omask 1:48 Mirage 2000 wheel bay plugs (for the Kinetic kit) is a set of shaped plugs of flexible foam that seal the landing gear bays while a model is being sprayed. It is not a kit but a masking accessory to the model from Kinetic.
In stock
3.20 €
GunzeC174

Mr. Color - fosforově růžová

A fluorescent pink with a rich, almost glowing look. It needs a white base and several thin coats, or it stays translucent.
In stock
2.80 €
1:48 Yellow jersey (Modern) (Right position from the aircraft)-25 %Stock ClearanceFavorite
ReskitRSF48-00251:48

1:48 Yellow jersey (Modern) (Right position from the aircraft)

1:48 Yellow jersey (Modern) (Right position from the aircraft) from Reskit is a figure of a modern deck crewman in a yellow jersey, posed for the right-hand side of the aircraft.
2 leftof 5
31.96 €23.96 € You save 8 €
Firma4949A043/351:35

1:35 Water Jerry Can 5gal- Great Britain

Firma49 1:35 British water jerry can (5 gal) is a resin (3D printed) accessory for models and dioramas.
In stock
5.96 €
MengVS-0171:35

1:35 German Pkw.K1 Kubelwagen Type 823

Pkw.K1 Kübelwagen Type 823 is an injection-molded plastic model of the German light military vehicle in the special training and decoy variant with a dummy turret, in 1:35 scale from Meng. The model is supplied unassembled and unpainted.
In stock
13.56 €
ReskitRS48-03371:48

1:48 BRU-3A bomb racks for F-111 (2 pcs)

BRU-3A bomb racks for the F-111 (2 pcs) is a 3D printed resin set from Reskit in 1:48 scale. It is not an aircraft model but a detail accessory for a kit of the F-111 bomber.
In stock
11.56 €
1:32 Mk 20 Rockeye II (CBU-59 APAM) Cluster bombs (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05131:32

1:32 Mk 20 Rockeye II (CBU-59 APAM) Cluster bombs (4 pcs)

Reskit Mk 20 Rockeye II (CBU-59 APAM) 1:32 is a set of four 3D-printed resin cluster bombs for realistically completing the external stores of combat aircraft models.
3 leftof 6
15.16 €11.36 € You save 3.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.