1:35 AH-64A 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)

1:35 AH-64A 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)

20.96 €
Add to Cart

1:35 AH-64A 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)

AH-64A, colored interior on decal backing paper 1:35 from Quinta Studio carries three-dimensionally printed cockpit detail onto a model of the attack helicopter. Intended for the Trumpeter kit.

Scale1:35
Manufacturer Quinta Studio
Product EAN8591111870955

Responsibility details are not available.

27.96 € 20.96 €
17.32 € without VAT
−25 % You save 7 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A three-dimensionally printed AH-64A interior in 1:35 scale

Quinta Studio makes a particular kind of accessory: the motif is printed three-dimensionally, so it has real thickness and relief, but the carrier remains a decal film. The parts are therefore neither cut nor glued like resin but applied with water like a decal. The designation of the smaller version in the name means a narrower extent than with the expanded form of the same brand, covering the main surfaces of the cockpit, not every detail of the combat compartment. The base kit is Trumpeter.

The real subject

The AH-64 attack helicopter entered American army service in the middle of the eighties and became the model for a whole category. The crew sits in tandem one behind the other, under the fuselage hangs a chain gun aimed by the movement of the gunner's head, and the stub wings carry anti-tank missiles and rocket pods. The version with the letter A is the original form without the mast-mounted radar cover, which appeared only with the later shape of the machine.

Recommended procedure

The plastic moldings of the instrument panels and side panels are first sanded flat so that the film seats over the whole surface. Paint the surface under the motif in a dark shade; light plastic showing through would lighten the result. Close the surface with gloss clear coat, dip the motif briefly in lukewarm water and transfer it to its place, where you will straighten it with a soft brush. Do not use decal softener or decal fixer, as the chemistry will attack the printed resin and ruin the piece. Once dry, the surface can be tuned with dark pin washes around the instruments.

Who the accessory suits

  • modelers who want a rich interior without painting small instruments
  • builders of large helicopter models with an open cockpit
  • those interested in a quick result on the most demanding part of the build
  • everyone who already has experience of applying decals to vertical surfaces

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Photo-etch is a metal sheet that has to be bent, glued and painted. Here the motif is already colored, has a thickness of its own and is applied with water like a decal.

With some types the brand offers two extents. The smaller one covers the main surfaces of the cockpit; the expanded one goes into a greater number of details of the combat compartment.

Yes, it is a good idea to paint the surface in a dark shade. Light plastic would show through and the color of the three-dimensional print would lose its depth.

For the Trumpeter kit in 1:35 scale. The base kit is not included in the package.

Last seen

1:35 AH-64A 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS351321:35

1:35 AH-64A 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version)

AH-64A, colored interior on decal backing paper 1:35 from Quinta Studio carries three-dimensionally printed cockpit detail onto a model of the attack helicopter. Intended for the Trumpeter kit.
4 leftof 5
27.96 €20.96 € You save 7 €
GunzeSF287

Mr. Primer Surfacer 1000 - stříkací tmel 40ml

Mr. Primer Surfacer 1000 is a gray filling primer and putty from Gunze with a grit of 1000, 40 ml, which evens out a base and fills fine flaws.
In stock
6.80 €
KineticK480591:48

1:48 Fouga Magister Austrian Air Force

The Fouga CM.170 Magister in the colors of the Austrian Air Force is a plastic kit of the French jet trainer in 1:48 scale from Kinetic.
In stock
35.96 €
MengTS-0261:35

1:35 M1A2 ABRAMS TUSK I/TUSK II SEP

Plastic kit of the American M1A2 SEP Abrams main battle tank in 1:35 scale, with a choice of the TUSK I or TUSK II configuration.
In stock
63.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.