The set of sensors and antennas for the Su-25SM 1:48 is a 3D printed resin set of external sensors and antennas for a model of the upgraded Su-25SM ground-attack aircraft in 1:48 scale.
Responsibility details are not available.
The set brings 3D printed resin replacements for the external sensors and antennas on a model of the upgraded Su-25SM ground-attack aircraft and its newer SM3 form, in 1:48 scale. In injection-molded plastic these small things tend to be thickened and it stands out on a finished model.
The Su-25SM is the upgraded form of the Su-25 ground-attack aircraft with new avionics, navigation and a wider range of weapons. Outwardly the upgrade showed itself precisely in the new antennas and sensors, by which the machine is told apart from the original version. The newer SM3 form added further items of equipment. In reality they are thin rods, vanes and plates whose scale thickness a mold cannot render.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Number the small parts before you cut them off the supports, because once separated they are easily mixed up.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
