The D-30F6 engine nozzles for the MiG-31 in 1:72 replace the plastic exhaust nozzles from the kit with printed parts. It is an accessory, not an aircraft model.
Responsibility details are not available.
A detail set from the Russian manufacturer Temp Models in 1:72 scale, printed from photopolymer. It holds the exhaust nozzles of the D-30F6 engines in the form for the MiG-31. It replaces the plastic nozzles from the kit and does not make up an aircraft model on its own.
The D-30F6 is a turbofan engine with an afterburner, developed from an airliner powerplant for the needs of the heavy MiG-31 interceptor. It was this engine that made possible the long supersonic flight for which other aircraft of the day did not have the fuel. The variable exhaust nozzle is made up of rings of petals, and plastic kits as a rule simplify it to a smooth cone with no depth.
Cut the print supports away with a scalpel and sand the pads carefully, because every unevenness shows clearly in the mouth of a nozzle. Glue the parts with cyanoacrylate glue, that is with super glue. The inside of the nozzle looks best in metallic shades with heat staining toward blue-violet and brown; metallic paints go on over a smooth gloss base and are harder to mask, so leave them for last. Sanding is best done wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
