Figures of Russian Air Force pilots with a g-suit and a helmet, 1:72 scale, set number 22 are 3D-printed figures from Temp Models.
Responsibility details are not available.
A set of 3D-printed resin figures of Russian Air Force pilots in 1:72 scale from Temp Models. The abbreviations in the name refer to the g-suit and to a protective helmet of a current type, that is to the gear in which the pilot of a combat aircraft walks out to the machine. It is not an aircraft model but the crew for it.
The g-suit is one of the most important parts of a fighter pilot's gear. During maneuvers with high g-loads its bladders inflate and squeeze the legs and the abdomen, so that the blood does not drain from the head and the pilot does not lose consciousness. On a figure it can be told by the hose running to the side and by the distinct seams on the thighs. Together with a protective helmet of a current type it gives a figure an unambiguous place in time.
The parts are held only by the thin supports from the print. Cut them off with a sharp scalpel as close to the part as possible, sand the marks with fine abrasive paper and protect your airway while sanding. It is glued with cyanoacrylate glue (super glue). Lay a thin coat of primer under the paint. Paint the helmet and the hose separately from the suit, otherwise they will merge with it in a small scale.
The figures are supplied unassembled and unpainted. Glue, paints and the aircraft model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
