SU-35 LANDING GEARS 1/72

These landing gear legs for the Su-35 in 1:72 hold, according to the manufacturer, the nose as well as the main legs with imitated electrical and hydraulic systems, a mudguard and wheels, reinforced with steel rods. An accessory for a kit.

Scale1:72
Manufacturer Temp Models

Responsibility details are not available.

Price to be confirmed
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Su-35 landing gear legs in 1:72 from Temp Models

A detailed replacement landing gear in 1:72 scale from the Russian manufacturer Temp Models. For the set the manufacturer gives finely detailed nose and main legs in the ground position with imitated electrical and hydraulic systems and landing lights, as well as a mudguard and wheels. According to the manufacturer the legs are made by 3D prototyping from a high-strength polymer and reinforced with steel rods.

The real subject

The Su-35 is a deeply upgraded fighter of the Su-27 family with new avionics and with engines with thrust vectoring. The strengthened airframe and the larger fuel load mean a higher takeoff weight, so the landing gear was given sturdier legs and the nose leg carries a prominent mudguard protecting the engine intakes. The plastic legs from a kit tend to be simplified and soft in this scale.

Building and painting tips

Landing gear legs are among the most heavily loaded parts of a model. The steel reinforcement inside the parts raises their load capacity markedly, yet let the joints cure thoroughly before you stand the model on its wheels. Cut the print supports away with a scalpel and sand the pad, and glue the parts with cyanoacrylate glue, that is with super glue. Landing gear legs used to be light gray and got dirty quickly, so a dark wash and fine traces of dust show up well on them. Sanding is best done wet and with respiratory protection.

Who the set is for

  • modelers building the Su-35 in 1:72 scale
  • builds where the landing gear should be sturdy and detailed
  • dioramas in which the landing gear is clearly visible
  • more experienced modelers used to printed parts

The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer states that the legs are reinforced with steel rods, which raises their load capacity markedly over plastic parts.

According to the manufacturer, the nose and main legs in the ground position with imitated electrical and hydraulic systems, landing lights, a mudguard and wheels.

No. It is a replacement landing gear for a finished Su-35 kit.

Last seen

EduardEX10351:48

1:48 Blackburn Buccaneer S.2B TFace

Double-sided masks for the glazing of the Blackburn Buccaneer S.2B in 1:48 scale, TFace version.
In stock
13.80 €
MontexMXSM480361:48

1:48 P – 51 D Mustang

Templates for the glazing of the 1:48 P-51D Mustang. They cover the windscreen and the sliding teardrop canopy from both sides and are matched to the Tamiya kit.
In stock
5.16 €
HaulerHLX483381:48

1:48 Sd.Kfz.232 front bumper/spoiler (Tamiya)

A photo-etched front bumper and spoiler for the Sd.Kfz.232 in 1:48 scale is an accessory set for a plastic kit you have already bought, not a model. Thin metal replaces an oversized plastic part and gives the nose of the armored car the correctly slim profile.
In stock
7.16 €
RB modelRB200L321:200

1:200 Retwizan

RB model 1:200 — turned metal barrels for the battleship Retvizan . An accessory that replaces the plastic barrels on a model.
In stock
11.96 €
1:48 F-16C Block 25 LooK-25 %Stock ClearanceFavorite
EduardED6442071:48

1:48 F-16C Block 25 LooK

1:48 F-16C Block 25 LööK is an Eduard accessory instrument panel set for a model of the F-16C multirole combat aircraft in 1:48 scale. It is not a kit.
6 leftof 8
9 €6.76 € You save 2.24 €
AiresAIR71341:72

1:72 German 20mm guns MG FF

Aires 1:72 German 20 mm MG FF cannons is a resin detail set for a faithful rendering of the MG FF aircraft cannon on aircraft models.
In stock
5.20 €
1:700 USS New Jersey BB-62-25 %Stock ClearanceFavorite
TamiyaTA316141:700

1:700 USS New Jersey BB-62

A plastic kit of the battleship USS New Jersey BB-62 in 1:700 scale from Tamiya (Waterline Series) — the American Iowa-class battleship.
Last one!of 2
31.56 €23.68 € You save 7.88 €
FujimiFU722981:72

1:72 JGSDF Light Armoured Vehicle

Fujimi 1:72 JGSDF Light Armoured Vehicle : a kit of the light armored vehicle of the Japan Ground Self-Defense Force in 1:72 scale.
In stock
23.56 €
GasPatch modelsGP19-722151:72

1:72 Marlin M1917 Early Type (2 Items)

Marlin M1917 Early Type 1:72 is a resin detail accessory from GasPatch models. According to the name the package contains two castings of the American aviation machine gun; it is not a kit.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.