LPW19 - Wooden Deck Shadower Liquid Pigments Washes

LPW19 - Wooden Deck Shadower Liquid Pigments Washes

3.96 €
Add to Cart

LPW19 - Wooden Deck Shadower Liquid Pigments Washes

Shading a wooden deck is the job of Wooden Deck Shadower from Lifecolor — a liquid pigment from the Liquid Pigments Washes range. It is used in the places where the deck should be darker than its surroundings, typically along superstructures and in corners.

Manufacturer Lifecolor
Product EAN1591100783670

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden Deck Shadower — shadow on a wooden deck

Where a darkening shade changes the tone of a whole area, this Lifecolor liquid pigment from the Liquid Pigments Washes range is meant to create darker places on a deck exactly where you want them. It is pigment in a carrier fluid; once dry a pigment deposit stays on the surface that can be rubbed out or strengthened with another layer.

A two-step procedure

The best results come from working in two steps. In the first, lay the shaken suspension on with a narrow brush along the obstacles — against the sides of superstructures, against the edges of hatches, into the corners and against the railings. In the second, before the coat has dried completely, rub the transition out with a dry soft brush away from the shadow, so that no sharp boundary stays between the dark and the light place.

Repetition matters more than strength. Two or three fine layers give a smooth transition that one heavy application will never make. Let the surface rest between layers and look at the model from a distance, not from ten centimeters.

Why not an ordinary wash

A wash flows into the seams between the planks and makes a thin dark line — which is a different effect from a shadow across an area. A liquid pigment settles in the middle of a plank as well and can be rubbed out into a soft transition. On a deck that looks good both techniques have their place; each just deals with something else.

Use

  • Shadows along superstructures, turrets, hatches and walls on ship decks.
  • Darkening corners and less accessible places where light does not reach.
  • Bringing out the uneven wear of wood in service.
  • Fine graduation of areas that look flat after spraying.

Who the color is for

For modelers of ships and of all models with wooden areas who already know basic patina and want to take decks a level further. A less experienced modeler will manage it too, because the effect is built up slowly and can be stopped at any time.

Keep out of the reach of children. Stir the contents thoroughly before each use and keep the bottle closed. Try the procedure out on a test patch with the same surface as the model has.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A darkening shade changes the tone of a whole area. This one is meant to create darker places only where they belong, with a soft transition into the surroundings.

Before the coat has dried completely. At that moment the pigment can be moved with a dry brush and the boundary between the shadow and the light area disappears.

Usually two to three fine ones. One heavy application makes a patch with a sharp edge that you will then hardly correct.

Last seen

LifecolorLIFLPW19

LPW19 - Wooden Deck Shadower Liquid Pigments Washes

Shading a wooden deck is the job of Wooden Deck Shadower from Lifecolor — a liquid pigment from the Liquid Pigments Washes range. It is used in the places where the deck should be darker than its surroundings, typically along superstructures and in corners.
In stock
3.96 €
Red Fox StudioRSFQS-240141:24

1:24 USA License plates vol.02

USA License plates vol.02 1:24 (Red Fox Studio) is a set of color 3D decals of American license plates for car models in 1:24 scale.
In stock
16.76 €
Jakab PublishingJKB507AM

7. AEROmodel č.7 Hurricane Mk.I a Bf 109E

AEROmodel no. 7 Hurricane Mk.I and Bf 109E is a Czech printed publication of the publisher Jakab Publishing devoted to a pair of fighter aircraft from the beginning of the Second World War. It is not a kit, but a book.
In stock
4.76 €
FujimiFU046271:24

1:24 Nissan Skyline R33 V-Spec

1:24 Nissan Skyline R33 V-Spec is a plastic kit of the Japanese sports coupe of the R33 generation in V-Spec trim from the manufacturer Fujimi.
In stock
28.76 €
CMKF350101:35

1:35 US Infantry Equipment WW II

A set of equipment of the American infantry of the Second World War period in 1:35 scale from CMK will complete figures and interiors with small gear.
In stock
5.96 €
Model MakerMM-CV320011:32

1:32 F-16a/b/c/d strengthening plates - vinyl

Vinyl masking templates in 1:32 scale for the strengthening plates on the F-16 fuselage let you spray this characteristic detail instead of drawing it on or using a decal.
In stock
5.16 €
Amaim Warrior At The Borderline Weapon Set 3 - Kyoukai Senki-25 %Stock ClearanceFavorite
BandaiBAN65093

Amaim Warrior At The Borderline Weapon Set 3 - Kyoukai Senki

Amaim Warrior At The Borderline Weapon Set 3 is a further part of the line of add-on weapon sets for the mecha kits from the Kyoukai Senki series by the manufacturer Bandai. The package contains armament, not a complete robot.
2 left
21.56 €16.16 € You save 5.40 €
1:32 GBU-54 (LJDAM) bombs thermally protected (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05051:32

1:32 GBU-54 (LJDAM) bombs thermally protected (4 pcs)

Four GBU-54 guided bombs in the thermally protected form in 1:32 scale as add-on armament for aircraft models.
Last one!of 6
15.96 €11.96 € You save 4 €
Mettalic DetailsMDP480321:48

1:48 RAF and USAF Aircrew Parachutes (3D-Printed)

Metallic Details 1:48 RAF and USAF aircrew parachutes are 3D-printed resin parachutes for the seats of Allied aircraft models.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.