A liquid pigment on an enamel base in an ocher rust shade. It serves for weathering models, for streaks and for traces of corrosion.
Responsibility details are not available.
Unlike a loose pigment, the powder is already mixed into a binder, so it is applied with a brush straight from the bottle and once dry it holds on the surface by itself, with no additional fixing. The word enamel in the name states what the product is thinned with and what it can be adjusted with after application: with a thinner meant for enamel paints. That is precisely what is valuable about a liquid pigment, because until the thinner has evaporated a trace can be moved, drawn out and wiped until it looks the way it should.
Ochre rust is a lighter tone of corrosion tuned toward yellow. It comes in on streaks below rivets and hinges, on the lower edges of fenders and side panels, on chains, hinges and tools, that is everywhere water stays longer than elsewhere. Apply it sparingly, because rust works by contrast with the surrounding coat rather than as a continuous area.
Always shake the bottle thoroughly, as the pigment settles at the bottom when standing. Work on a completely dry surface and over small areas: lay a trace down, wait a few tens of seconds and then blend it with a brush moistened in thinner, from the top down, the way water would run. Let a finished area dry thoroughly before you apply further coats over it.
The pigment alone is supplied. The model, the thinner and the brushes are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!