Search

Below you will see search results for the term:

96 632 products
Product filtering
up to €
MontexMXMM484091:48

1:48 Ki-61 II HIEN

A masking set for a 1:48 model of the Japanese Kawasaki Ki-61-II Hien fighter. It holds two canopy templates, separately for the outer and for the inner side, and one national insignia mask. The shapes are derived from the kit by RS Model. The film is pre-cut, so the cockpit frames only need to be lifted out and transferred to the part with tweezers.
In stock
6.36 €
MontexMXMM483761:48

1:48 RAF STANDARD FIN FLASH

Stencils for spraying the vertical three-color stripe on the fin of British aircraft, 1:48 scale. The package contains two marking masks, that is a set for both sides of the fin of one model. The glazing is masked separately; the sheet is devoted exclusively to markings. The pre-cut film is transferred with tweezers and paint is applied straight over it.
In stock
5.96 €
MontexMXMM483741:48

1:48 RAF ROUNDELS TYPE C1

A self-adhesive template of the British type C1 national insignia for 1:48 scale. This is the later roundel with narrow rings, completed by a thin yellow outline around the perimeter as British machines wore it on the sides of the fuselage from 1942. The stated contents are one national insignia mask; glazing masks and decals are not included. The paint is applied straight over the film.
In stock
6.36 €
MontexMXMM483731:48

1:48 RAF ROUNDELS TYPE C

A sheet with three pre-cut stencils for the British Type C roundel for 1:48 models. This variant has a noticeably narrower white and red band than the older form, so it looks more restrained and the blue area predominates in it. The package carries markings only; there are no glazing masks in it. Spraying through film gives an insignia that is a real layer of paint, not a film laid on the surface.
In stock
8.76 €
MontexMXMM483721:48

1:48 RAF ROUNDELS TYPE B

Three pre-cut stencils for spraying the British Type B national insignia in 1:48 scale. It is the subdued form of the roundel, made up only of a red center and a blue outer circle, with no white ring. The package contains three marking masks and no glazing mask. The insignia is sprayed in paint, so the result has no glossy edge and will stand even a heavy matte overcoat.
In stock
8.76 €
MontexMXMM483711:48

1:48 RAF ROUNDELS TYPE A1

Pre-cut stencils for spraying the British Type A1 national insignia in 1:48 scale, that is the roundel supplemented with a narrow yellow outer border. In the package there are two insignia masks and nothing else; the glazing of the model is masked separately. The film holds the shape of the individual rings, so the colors are applied in layers and the resulting insignia is part of the sprayed finish, not a stuck-on film.
In stock
7.96 €
MontexMXMM483701:48

1:48 RAF ROUNDELS TYPE A

A sheet of pre-cut templates for spraying the British type A roundel in 1:48 scale. The package holds two national insignia masks and no glazing mask at all. The marking is sprayed directly in paint, so no glossy carrier film and no step at the edge appear on the model as they do with decals. The templates are not tied to one particular kit.
In stock
7.96 €
MontexMXMM483611:48

1:48 Heinkel He 70

A set of self-adhesive templates for a 1:48 model of the fast Heinkel He 70 low-wing monoplane. It holds a pair of glazing masks, one for the outer side of the canopy and one for the inside, plus one national insignia mask. The film is pre-cut to its final shape, so the frames only need to be lifted out with tweezers and transferred to the part. The templates are built for the kit from AZ Model.
In stock
5.56 €
MontexMXMM483361:48

1:48 Spitfire MkI

A full set of masks for the glazing from both sides and two sets of insignia for the Spitfire Mk.I in 1:48 scale. It fits the Airfix kit.
In stock
7.96 €
MontexMXMM483151:48

1:48 ARADO 196

Glazing masks from the outside and the inside plus two sets of national insignia for the Arado Ar 196 floatplane in 1:48 scale. Italeri is the kit the cut is made for.
In stock
7.96 €
MontexMXMM482871:48

1:48 Bristol Blenheim I

A masking set for both sides of the glazing and two sets of insignia for the Bristol Blenheim Mk.I in 1:48 scale. It matches the Classic Airframes kit.
In stock
8.76 €
MontexMXMM482841:48

1:48 Fairey Firefly

A double-sided mask for the glazing and three complete sets of national insignia for the two-seat carrier-based Fairey Firefly in 1:48 scale. Made to measure for the AZ MODEL kit.
In stock
8.76 €
MontexMXMM482771:48

1:48 Blackubrn Roc MkI

Film for covering the glazing from both sides and two sets of national insignia for the carrier-based Blackburn Roc Mk.I in 1:48 scale. The target is the Special Hobby kit.
In stock
7.96 €
MontexMXMM482711:48

1:48 Dornier Do-17Z

A double-sided mask for the glazed nose and one complete set of national insignia for the Dornier Do 17Z in 1:48 scale. The measurement is taken from the Classic Airframes kit.
In stock
7.16 €
MontexMXMM482631:48

1:48 Bf 109F

A double-sided glazing mask and one set of national insignia for the Messerschmitt Bf 109F in 1:48 scale. Meant for the ICM kit.
In stock
6.36 €
MontexMXMM482511:48

1:48 Wellington IC

Masking of the glazing from the outside and two sets of national insignia for the Vickers Wellington IC night bomber, 1:48 scale. The dimensions are taken from the Trumpeter kit.
In stock
7 €
MontexMXMM482371:48

1:48 Walrus

A glazing mask and four full sets of national insignia for the amphibious Supermarine Walrus in 1:48 scale. The set is figured for the Classic Airframes kit.
In stock
8.76 €
MontexMXMM482361:48

1:48 Spitfire MkIX/XVI

A set of masks for the glazing from both sides plus two sets of insignia for the Spitfire Mk.IX and Mk.XVI, 1:48 scale. The dimensions come from the Airfix kit.
In stock
7.16 €
MontexMXMM482301:48

1:48 D.H.MOSQUITO B MKXVI

An outer glazing mask and two sets of national insignia for the bomber Mosquito B Mk.XVI in 1:48 scale. The cut is based on the Airfix kit.
In stock
7.96 €
MontexMXMM482271:48

1:48 Ju-88C-6 NIGHT FIGHTER

A spraying mask for the glazing from both sides and one complete set of national insignia for the Junkers Ju 88C-6 night fighter in 1:48 scale. The cut matches the Dragon kit.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.