An aid for marking and scribing on a plastic model, from the group of gravers and chisels. The range of use and the recommended procedure are given in the manufacturer's instructions.
Responsibility details are not available.
This is a tool for the modeling workbench from the group of gravers and chisels for scribing and panel lines. It comes into play at the stage when the position of a future line, hole or accessory has to be transferred onto a part: to mark the place precisely and only then reach for a graver, a drill or a file. Marking out is the step the precision of all the following work rests on, because a line once scribed cannot be undone.
The proven procedure is always the same. First clean and degrease the part, so that nothing slides over the surface. Mark on a dry and firmly supported part, ideally on a base that does not move. Work repeatedly with light pressure: several light passes hold the direction far better than one heavy one, which easily slips and scratches the surroundings. Finally check the finished marking against the drawing or against the other half of the model, and only then deepen it. The particular settings and range of use of this piece are described in the manufacturer's instructions.
It will be reached for by builders who alter the panel lines on a model, add riveting or glue small parts in a precisely given place, and it is useful wherever parts from different kits are joined into a form of one's own. Paints, glue and other tools are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!