An extensive pack of products for metal surfaces: polished duralumin skin, discolored exhausts, burnished track links and chipped steel on tools and stowage.
Responsibility details are not available.
Bare sheet metal does not behave like a matte field color. It reflects its surroundings, changes tone with the angle of view, and neighboring panels differ from one another according to which melt the sheet came from and how long it stood in the rain. A single even silver coat therefore looks like a toy, whereas a convincing surface comes from laying several close shades side by side.
The set aims at the whole path from base to final soiling. It suits unpainted skins on airliners and fighters, the barrels and breeches of weapons, the running surfaces of tracks polished to a mirror shine by driving and small ironwork where paint has rubbed the edges and clean steel has appeared underneath. It also serves well on locomotives, engines and kitchen utensils in dioramas, that is everywhere the difference between a warm brass and a cold steel shine should be apparent.
Metallic shades need a perfectly smooth bed: sand the joints, spray a smooth base over them and let it cure thoroughly. Only then apply thin coats, ideally with an airbrush at low pressure. Do not blend the shades into one another too much, as they lose their sparkle. Apply masking tape carefully and rather lift its tack on the back of your hand first, because a fresh metallic film is easily pulled away. A final dark wash in the panel lines gives the sheet depth. Brass and bronze tell best next to cool grays, because a warm tone needs a cold neighbor for comparison.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!