The DSPIAE Tungsten Steel Panel Line Scriber Push Broach 0.5 mm is a push scriber of tungsten steel with a chisel edge 0.5 mm wide for scribing grooves and panel lines.
Responsibility details are not available.
A push scriber of tungsten steel with a flat edge 0.5 mm wide. A half-millimeter groove is pronounced enough to be reliably highlighted with thinned paint, and yet does not read as a cut. It belongs to the middle widths of the range, which suit more pronounced parting seams, hatches and access panels.
The scriber works dry and the only things that really harm it are stuck-on swarf and mechanical damage to the tip. After every longer spell of work, therefore, wipe the plastic dust off the edge with a soft cloth or an old brush. Residues of plastic that stick to the edge from frictional heat can usually be lifted off with a wooden toothpick; do not scrape along the edge with a metal tool. Storage matters as much as cleaning: a scriber tossed loose in a drawer among pliers and tweezers will have its edge knocked about before you manage to wear it out with work.
For modelers who scribe regularly and want to keep the tool in condition for the long term, and for those who need more pronounced lines on larger areas.
Do not use aggressive solvents for cleaning beyond the manufacturer's recommendation, and store the tool out of the reach of children. The edge stays sharp even once it is clogged with plastic dust.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!