1:16 Aditional smaller mesh used on some Tiger I, Ausf.E under standart grilles

1:16 Aditional smaller mesh used on some Tiger I, Ausf.E under standart grilles

19.96 €
Add to Cart

1:16 Aditional smaller mesh used on some Tiger I, Ausf.E under standart grilles

Additional fine mesh screens under the engine deck grilles for the Tiger I, Ausf. E tank in 1:16 scale are a photo-etched set from the maker Aber. It is not a model but a detail accessory.

Scale1:16
Manufacturer Aber
Product EAN8591111000000

Responsibility details are not available.

19.96 €
16.50 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Additional fine mesh screens under the grilles of the Tiger I, Ausf. E in 1:16 scale

This is a photo-etched detail set in 1:16 scale from the Polish maker Aber. It is not a model of a vehicle but an accessory that is fitted into a kit that has already been built. The set contains fine mesh screens of the kind that were fitted on some Tiger I, Ausf. E machines under the standard grilles above the engine compartment. The number of parts and the dimensions of the fret are stated on the box of the set. Before buying we recommend comparing the set with the kit you are building on, because the spacing and the shapes of the grilles differ between makers.

What the accessory is for

Plastic kits as a rule deal with the grilles of the engine compartment with a solid part or a coarse grid, which in 1:16 scale comes across as simplified. A photo-etched screen has a real thickness of a few tenths of a millimeter and genuine openings, so once it is installed a view into the depth arises. In a large scale this detail is clearly visible, because the upper surface of the hull is among the most exposed places on a model.

Fitting tips

Nip the parts out of the fret with a sharp scalpel on a hard surface, not by breaking them out, otherwise the thin sheet buckles. Degrease the surface with spirit before gluing. It is glued with superglue applied in a minimal quantity, ideally with the tip of a wire, so that the glue does not get into the openings of the mesh. If a screen is not flat, level it between two smooth metal surfaces. It can be painted only after gluing, but it pays to apply a thin coat of base paint for metal first, so that the pigment does not peel. Primers meant for metal are suitable, as are paints applied with an airbrush in thin coats, which do not flood the openings.

Who the set is for

  • For modelers who build the Tiger I, Ausf. E in the large 1:16 scale
  • For builders who are bothered by simplified grilles of plastic
  • For modelers with experience of photo-etched parts and superglue
  • For those who build a model for a display case or for a competition

This is an accessory for a more advanced build, not a model in its own right. Glue, paints and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a photo-etched detail accessory for a kit that has already been built; the vehicle itself is not in the package.

We recommend comparing the dimensions of the grilles with your own model before buying; the spacing and the shapes differ between makers.

Superglue applied in a minimal quantity. Glue for plastic does not hold on metal.

The number of parts and the size of the fret are stated on the box of the set.

Last seen

AberABR160561:16

1:16 Aditional smaller mesh used on some Tiger I, Ausf.E under standart grilles

Additional fine mesh screens under the engine deck grilles for the Tiger I, Ausf. E tank in 1:16 scale are a photo-etched set from the maker Aber. It is not a model but a detail accessory.
In stock
19.96 €
Aires/QuickboostQB725421:72

1:72 Kamov Ka-27 Helix seats with safety belts

Seats with belts for the Kamov Ka-27 Helix 1:72 (Quickboost) is a resin detail set of seats with cast safety belts for a model of the Soviet naval helicopter.
In stock
7.96 €
Hobby DesignHD07-00451:24

1:24 Shaft Nut for Nissan GTR Racing (4pcs + photoetch)

1:24 Shaft Nut for Nissan GTR Racing is a supplementary set of wheel center nuts for racing models of the Nissan in 1:24 scale.
In stock
6.36 €
J´s WorkPPA50321:35

Marking Mask for 1/35 WWII T34/85 Turret Markings

Js Work Marking Mask 1/35 WWII T34/85 Turret Markings is a set of masking films for spraying the turret markings of the Soviet T-34/85 tank.
In stock
5.96 €
Planet modelsMV1331:72

1:72 Morris CS9 British Light Armored Car ‘North African Campaign’

Planet Models 1:72 Morris CS9 is a resin kit of the British light armored car in the version for the North African campaign, intended for experienced modelers.
In stock
19.96 €
TechmodTECH480751:48

1:48 Supermarine Spitfire F.IX (Gabreski’s Spitfires)

A print for three Spitfires of the F.IX version flown in the winter of 1943 by an American fighter pilot of Polish origin with No. 315 Polish Squadron. The sheet carries the squadron code letters as well as the serial numbers of the individual aircraft.
In stock
7.16 €
ReskitRSU35-00741:35

1:35 CH-54A Tarhe landing gear (WITHOUT LOAD) with weighted wheels set for ICM kit

Reskit CH-54A Tarhe — landing gear WITHOUT LOAD with weighted wheels 1:35 is a 3D-printed resin detail set for the ICM kit. The wheels have a realistically sagging tire matching a machine without a slung load . It is not a kit — you have to own the base ICM model.
In stock
52.76 €
VallejoVAL750711:72

Aircraft 1/72 Cold War: Painting & Weathering Techniques (English)

Aircraft 1/72 Cold War — Painting and Weathering Techniques is a modeling guide from the publisher Acrylicos Vallejo on painting and weathering Cold War aircraft. A publication, not a kit.
In stock
27.56 €
Ukrainian Scale Cars Production (USCP)U24P193t1:24

1:24 Mugen CF-48 with aero cover 15 + tires

Wheels in the Mugen CF-48 pattern with aerodynamic covers and tires, in the fifteen-inch size and in 1:24 scale.
In stock
19.16 €
Síra HobbyPG03

Pigmentový gel - střední zem

Pigment gel - medium earth is a Czech weathering pigment gel in a medium earth shade for imitating dust, soil and mud on models.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.