1:35 GERMAN AFV SMOKE LAUNCHERS, TUBES WITH GRENADES, FOR KIT OR PE HOLDERS, FOR 1 VEHICLE

1:35 GERMAN AFV SMOKE LAUNCHERS, TUBES WITH GRENADES, FOR KIT OR PE HOLDERS, FOR 1 VEHICLE

4.76 €
Add to Cart

1:35 GERMAN AFV SMOKE LAUNCHERS, TUBES WITH GRENADES, FOR KIT OR PE HOLDERS, FOR 1 VEHICLE

1:35 German smoke grenade launchers, tubes with grenades is a resin accessory set from the ELEFANT brand for models of German armored vehicles in 1:35 scale, in an extent for one vehicle.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

German smoke grenade launchers, tubes with grenades, in 1:35 scale

This is a resin accessory set from the ELEFANT brand in 1:35 scale. It is not a kit of the vehicle but a small detail accessory. The set contains the tubes of the launchers with grenades inserted, that is the variant with the charge in place, as against the form with empty tubes. According to the name it is intended for use with holders from the kit or with photo-etched holders, and its extent is enough for one vehicle.

The real subject

Smoke grenade launchers were mounted on German armored vehicles of the Second World War period in groups of several pieces on the sides of the turret or the hull. A fired grenade created a screen in front of the vehicle that allowed the crew to break contact and move away. It was a small but visually prominent element, and on a model it is usually found in the best visible place of the silhouette, so it pays to replace the coarser plastic part with a more accurate casting with a drilled muzzle.

Building and painting tips

Wash the resin castings in lukewarm soapy water first so that paint holds on them. Cut the casting blocks off with a sharp scalpel or a saw and level the surface; hold small parts in tweezers so that they do not fly off. They are glued with cyanoacrylate glue; plastic cement has no effect on resin. It is practical to paint the launchers separately and to glue them on only after the base coat on the hull, because a sharp transition of colors arises around them. At the end a light dry brush and fine dust with a pigment come in useful, so that the part fits into the overall patina of the vehicle.

Who the set is for

  • Builders of models of German armored vehicles in 1:35 scale
  • Modelers who are not satisfied with the coarser plastic part from the box
  • Builders who already have photo-etched holders and lack the matching tubes
  • More experienced modelers used to working with small resin parts

The set is supplied unassembled and unpainted. Glue, paints and the base kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is a small detail accessory for a kit in 1:35 scale you have already bought.

This variant has grenades inserted in the tubes, so it matches loaded launchers. The form with empty tubes is a separate product.

According to the name the tubes are intended for use with holders from the kit or with photo-etched holders. The contents of the package are stated on the box of the set.

According to the name the extent is for one vehicle.

Last seen

ELEFANTELE351811:35

1:35 GERMAN AFV SMOKE LAUNCHERS, TUBES WITH GRENADES, FOR KIT OR PE HOLDERS, FOR 1 VEHICLE

1:35 German smoke grenade launchers, tubes with grenades is a resin accessory set from the ELEFANT brand for models of German armored vehicles in 1:35 scale, in an extent for one vehicle.
In stock
4.76 €
QMTQMTM720161:72

1:72 McDonnell F-4E/F-4F/F-4G/F-4EJ Phantom wheel bay paint masks

QMT 1:72 McDonnell F-4E/F-4F/F-4G/F-4EJ Phantom wheel bay paint masks is a masking set for painting the wheel bays of models of the land-based Phantom versions in 1:72 scale.
In stock
6.76 €
ReskitRS72-04671:72

1:72 SUU-16A 20mm Gun Pod (Close Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

The SUU-16A 20mm Gun Pod (Close Gun Bay) for wing mounting in 1:72 is a resin, 3D-printed replica of the gun pod for models of the F-4 Phantom II (C, D) in 1:72 scale by Reskit.
In stock
8.36 €
PANZER ARTRE35-8091:35

1:35 StuG lllG improvised roof armor ( 3SS PzGrenDiv “Totenkopf” StuG Abt)

An accessory in 1:35 scale for models of the German StuG III Ausf. G assault gun: improvised armor for the roof of the fighting compartment, of the kind crews added in the field.
In stock
13.96 €
PeewitPWM750011:72

1:72 CAC CA-12/CAC-13/CAC-19 Boomerang Wheel bay cover masks (paper)

Paper masks for the landing gear bays of a CAC Boomerang model in 1:72 scale, according to the product name for Special Hobby kits.
In stock
3.16 €
Quinta StudioQD720791:72

1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

Quinta Studio 1:72 F-15 Eagle (early) 3D interior decal gives the cockpit three-dimensional, pre-colored details applied the wet way, like a decal. Target kit: GWH.
In stock
8.36 €
IBG modelsIBG72M0031:72

1:72 PZL P.23 Karas - canopy PAINTING MASKS (for IBG Models kits: 72505-72511)

PZL.23 Karas canopy painting masks in 1:72 are precisely cut masks from IBG for a clean spray of the framing of the glazing of the Polish light bomber.
In stock
4.76 €
Voyager ModelPEA3361:35

1:35 WWII U.S.M8/M20 armored car tyre chains (For TAMIYA 35228 35234/ITALERI 6364)

A photo-etched set of tire chains for the M8 and M20 armored cars of the Second World War in 1:35 scale is an accessory for Tamiya 35228 and 35234 or Italeri 6364 kits you already own, not a model of the vehicle. It is made by Voyager Model.
In stock
10.36 €
Plastruct PLT90623

Squere Tubing (1 pcs) H-6,4mm W-6,4mm I.D-5,2mm Wall-0,6mm L-375mm

Plastruct square tube (Square Tubing) in polystyrene, outside 6.4 x 6.4 mm, inside 5.2 mm, wall thickness 0.6 mm and length 375 mm is a hollow modeling profile.
In stock
1.40 €
ReskitRS48-04031:48

1:48 Pylons for Mikoyan MiG-29 (APU-470 2 pcs for R-27 & APU-60 2 pcs for R-60

Pylons for the MiG-29 in 1:48 scale (Reskit) are a 3D printed accessory with APU-470 rails for R-27 missiles and APU-60 rails for R-60 missiles. It is not an aircraft model but weapons pylons.
In stock
10.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.