1:72 SUU-16A 20mm Gun Pod (Close Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

1:72 SUU-16A 20mm Gun Pod (Close Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

8.36 €
Add to Cart

1:72 SUU-16A 20mm Gun Pod (Close Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

The SUU-16A 20mm Gun Pod (Close Gun Bay) for wing mounting in 1:72 is a resin, 3D-printed replica of the gun pod for models of the F-4 Phantom II (C, D) in 1:72 scale by Reskit.

Scale1:72
Manufacturer Reskit
Product EAN8591111901276

Responsibility details are not available.

8.36 €
6.91 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

SUU-16A 20mm Gun Pod (Close Gun Bay), wing mounting 1:72 (Reskit)

A resin, 3D-printed replica of the SUU-16A gun pod in the version with the gun bay closed, adapted for mounting under the wings. The set is meant to complete models of the F-4 Phantom II (the C and D versions) in 1:72 scale. It is not an aircraft model but a separate armament part. The manufacturer is the Ukrainian company Reskit.

The real subject

The SUU-16A is an American podded gun with a 20 mm rotary cannon. It added firepower to Phantoms that had no built-in gun. The version with the bay closed shows the pod with its ram-air turbine housing closed, here in the configuration for wing pylons.

Building and painting tips

Wash the residue of uncured resin off the part, cut the supports off and sand it down with respiratory protection. Glue resin with cyanoacrylate glue, apply a primer and then the shades according to the scheme.

Who the set is for

  • Modelers of the Phantom in 1:72 scale
  • Anyone interested in the wing mounting of a gun pod
  • Builders looking for realistic armament

The set contains the resin parts only; paints, glue and the carrier model are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is adapted for mounting under the wings and has the gun bay closed.

No, it is a separate resin armament part for completing a finished model.

With cyanoacrylate glue, once the supports have been cut off and the part cleaned up.

Last seen

ReskitRS72-04671:72

1:72 SUU-16A 20mm Gun Pod (Close Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

The SUU-16A 20mm Gun Pod (Close Gun Bay) for wing mounting in 1:72 is a resin, 3D-printed replica of the gun pod for models of the F-4 Phantom II (C, D) in 1:72 scale by Reskit.
In stock
8.36 €
PANZER ARTRE35-8091:35

1:35 StuG lllG improvised roof armor ( 3SS PzGrenDiv “Totenkopf” StuG Abt)

An accessory in 1:35 scale for models of the German StuG III Ausf. G assault gun: improvised armor for the roof of the fighting compartment, of the kind crews added in the field.
In stock
13.96 €
PeewitPWM750011:72

1:72 CAC CA-12/CAC-13/CAC-19 Boomerang Wheel bay cover masks (paper)

Paper masks for the landing gear bays of a CAC Boomerang model in 1:72 scale, according to the product name for Special Hobby kits.
In stock
3.16 €
Quinta StudioQD720791:72

1:72 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (GWH)

Quinta Studio 1:72 F-15 Eagle (early) 3D interior decal gives the cockpit three-dimensional, pre-colored details applied the wet way, like a decal. Target kit: GWH.
In stock
8.36 €
IBG modelsIBG72M0031:72

1:72 PZL P.23 Karas - canopy PAINTING MASKS (for IBG Models kits: 72505-72511)

PZL.23 Karas canopy painting masks in 1:72 are precisely cut masks from IBG for a clean spray of the framing of the glazing of the Polish light bomber.
In stock
4.76 €
Voyager ModelPEA3361:35

1:35 WWII U.S.M8/M20 armored car tyre chains (For TAMIYA 35228 35234/ITALERI 6364)

A photo-etched set of tire chains for the M8 and M20 armored cars of the Second World War in 1:35 scale is an accessory for Tamiya 35228 and 35234 or Italeri 6364 kits you already own, not a model of the vehicle. It is made by Voyager Model.
In stock
10.36 €
Plastruct PLT90623

Squere Tubing (1 pcs) H-6,4mm W-6,4mm I.D-5,2mm Wall-0,6mm L-375mm

Plastruct square tube (Square Tubing) in polystyrene, outside 6.4 x 6.4 mm, inside 5.2 mm, wall thickness 0.6 mm and length 375 mm is a hollow modeling profile.
In stock
1.40 €
ReskitRS48-04031:48

1:48 Pylons for Mikoyan MiG-29 (APU-470 2 pcs for R-27 & APU-60 2 pcs for R-60

Pylons for the MiG-29 in 1:48 scale (Reskit) are a 3D printed accessory with APU-470 rails for R-27 missiles and APU-60 rails for R-60 missiles. It is not an aircraft model but weapons pylons.
In stock
10.76 €
ReskitRS72-05761:72

1:72 GBU-10 Paveway I laser guided bombs with BSU-37/B fin and BSU-3A/B wing (slow speed) thermally protected (2 pcs)

GBU-10 Paveway I - thermally protected (2 pcs) 1:72 - a resin 3D-printed set of two laser-guided bombs with a thermal protective surface, the BSU-3A/B wing and the BSU-37/B fin from Reskit.
In stock
9.56 €
Plastruct PLT90624

Squere Tubing (1 pcs) H-7,9mm W-7,9mm I.D-6,7mm Wall-0,6mm L-375mm

Plastruct square tube (Square Tubing) 7.9 x 7.9 mm is a hollow styrene profile 375 mm long for building structures and model accessories.
In stock
1.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.