SX-Art masking stencils for the 9K37 Buk missile system in 1:35 scale. Self-adhesive masks with which a motif is sprayed in paint instead of a decal.
Responsibility details are not available.
This is not a kit but a set of self-adhesive masking stencils prepared for a model of the 9K37 Buk antiaircraft missile system in 1:35 scale. The stencils are stuck to a painted and cured surface, oversprayed with a second color, and once they are taken off the motif remains, formed directly by the finish and not by the film of a decal.
A decal is always one thin layer extra. On a matte surface a glossy outline typically remains along its edge, and it seats poorly over raised detail. A sprayed motif behaves like the rest of the finish, stands varnishing, a wash and pigments and is in no danger of silvering. On vehicles with large flat side areas, of the kind this subject has, the difference in the final impression is especially easy to see.
The base must be smooth and fully cured, otherwise a mask will tear the paint away when removed. Reduce the tack of a stencil beforehand by laying it briefly on clean cloth. Apply the paint thinned, in several very thin coats and with an airbrush at a low pressure, so that it does not run under the edge. Take the stencils off shortly after the paint has set, with tweezers and at a sharp angle to the surface. Reckon with single use.
The package contains the masking stencils alone. A model, paints and thinners are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
