SX-Art masking stencils for the BMR-3M mine clearing vehicle in 1:35 scale. Self-adhesive masks with which a motif is sprayed in paint instead of a decal being stuck on.
Responsibility details are not available.
The set contains self-adhesive masking stencils for a model of the BMR-3M armored mine clearing vehicle in 1:35 scale. It is not a kit and not parts to be glued on. The stencils are stuck to a painted and cured surface, oversprayed with a second color, and once they are taken off the motif is formed directly by the finish.
Decal film lies on the surface as a layer extra, and a visible gloss remains along its edge on a matte finish. Over rivets, gaps and curved surfaces a decal also seats with difficulty and wrinkles easily. A sprayed motif does not have these weaknesses, behaves like the rest of the finish and stands varnishing, a wash and pigments without risk, which comes in useful on a heavily weathered engineer vehicle.
The base must be smooth and fully cured, otherwise a mask will tear the paint away when removed. Reduce the tack of a stencil beforehand by laying it briefly on clean cloth. Apply the paint thinned, in several very thin coats and with an airbrush at a low pressure, so that it does not run under the edge. Take the stencils off shortly after the paint has set, with tweezers and at a sharp angle to the surface. Reckon with single use.
The package contains the masking stencils alone. A model, paints and thinners are not part of it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
