1:35 US Army/MC M1A1 Main Battle Tank

A photo-etched set for a model of the M1A1 Abrams main battle tank in 1:35 scale from E.T. Model. An accessory for refining the detail of a plastic model, not a kit in its own right.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111718318

Responsibility details are not available.

29.96 €
24.76 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

M1A1 Abrams photo-etched set, 1:35 (E.T. Model)

A photo-etched metal set intended for refining the detail of a plastic model of the American M1A1 main battle tank in 1:35 scale. It is not a kit of the tank, but an aftermarket accessory with which plastic items are replaced in the places where injection-molded plastic cannot capture a thin wall convincingly. On a modern tank these are mainly the grilles above the powerpack, the covers, the hinges, the loops, the clamps and the fine brackets for equipment on the hull and the turret. The scope of the package follows the manufacturer's instructions.

The real subject

The M1A1 Abrams is an American main battle tank powered by a gas turbine and armed with a 120 mm smoothbore gun, which replaced the 105 mm rifled barrel of the original M1 version. It combines composite armor, a powerful fire control system and high mobility. Besides the ground forces the type was also used by the Marine Corps, which adapted the vehicles for expeditionary service. The type stayed in service for whole decades thanks to successive upgrades.

Tips for working with photo-etched parts

Cut the parts out with a sharp scalpel on a hard surface, and never break them out. Level the remains of the tags after cutting with a fine file. Make the folds along the marked score lines, ideally in a photo-etch bender. They are glued with cyanoacrylate; on large surfaces an epoxy gives more time to position the part. Degrease the metal before painting and lay down a primer. On modern vehicles it pays to make sure the fine grilles stay open, so spray them with thinned paint in thin coats. Once painted, the sharp edges of photo-etched parts take a wash and drybrushing nicely.

Who the set is for

  • Builders of modern American armor who want detail beyond the contents of the box
  • Modelers who are bothered by coarse grilles and loops on a plastic model
  • More experienced modelers with experience of bending and gluing metal
  • Contest and display builds, where the model is seen close up

This is an accessory photo-etched set. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package holds photo-etched metal parts for refining the detail. The plastic model of the tank has to be obtained separately.

Best in a photo-etch bender along the marked score lines. Without one, two straight blades and a rule will serve; make the fold in stages.

It can, if you spray thick paint from close up. Use thinned paint in several thin coats from a greater distance.

Working with metal calls for precision and a calm hand. We recommend that a beginner start with the larger parts and follow the enclosed instructions.

Last seen

E.T. ModelE35-2011:35

1:35 US Army/MC M1A1 Main Battle Tank

A photo-etched set for a model of the M1A1 Abrams main battle tank in 1:35 scale from E.T. Model. An accessory for refining the detail of a plastic model, not a kit in its own right.
In stock
29.96 €
OmaskOMK340491:48

1:48 Fi 156C Storch mask (for Tamiya 61100 scheme A,B)

Omask 1:48 Fi 156C Storch mask is a set of self-adhesive painting masks for the cockpit glazing of the matching Fieseler Fi 156C Storch kit in 1:48 scale, with masks prepared for schemes A and B.
In stock
7.96 €
LACILAC1440421:144

1:144 Rolls Royce RB211-524H for Boeing 767

1:144 Rolls-Royce RB211-524H for the Boeing 767 is a resin accessory for models of airliners — the engine nacelle of the British powerplant in the form for the Boeing 767.
In stock
21.96 €
AiresAIR41241:48

1:48 F-14A Tomcat cockpit set

A resin detail set of the cockpit for the F-14A Tomcat in 1:48 scale from Aires . An accessory for a kit that raises the fidelity of the cockpit, not an airplane model.
In stock
29.60 €
A-26B bomb bay 1/32
-50 %
Favorite
SaleV-ED324541:32

A-26B bomb bay 1/32

A-26B bomb bay 1:32 is a photo-etched detail set for the bomb bay space of the twin-engined Douglas A-26B Invader attack aircraft. It is not an airplane kit but an accessory for a plastic model in 1:32 scale.
In stock
41.96 €20.92 € You save 21.04 €
Aires/QuickboostQB483421:48

1:48 MC.200 Saetta gun barrels

Quickboost MC.200 Saetta - machine gun barrels 1:48 is a resin set of replacement barrels for the onboard armament for models of the Italian Macchi C.200 Saetta fighter.
In stock
3.56 €
AiresAIR44451:48

1:48 F/A-22A Raptor wheel bays

The Aires 1:48 F/A-22A Raptor wheel bays is a resin detail set of the landing gear bays. It is not an airplane model but an accessory for a kit.
In stock
16.80 €
Aires/QuickboostQB483471:48

1:48 C-47 Skytrain exhaust

Exhausts for the C-47 Skytrain are a resin detail part in 1:48 scale by the manufacturer Quickboost. It is not an aircraft model but an accessory. It is supplied unassembled and unpainted.
In stock
4.76 €
Aires/QuickboostQB486031:48

1:48 A6M Zero gun barrels

Quickboost A6M Zero gun barrels - resin barrels for the gun armament of the Japanese Mitsubishi A6M Zero fighter in 1:48 scale. This is an aftermarket accessory for a kit, not a model.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.