1:72 B-26 Marauder kola pozdní drážkovaný vzor

1:72 B-26 Marauder kola pozdní drážkovaný vzor

6.36 €
Add to Cart

1:72 B-26 Marauder kola pozdní drážkovaný vzor

1:72 B-26 Marauder wheels, late grooved pattern from Plusmodel is a set of resin wheels with a grooved tread for a model of the bomber. It is not a kit but an accessory.

Scale1:72
Manufacturer Plusmodel
Product EAN8591111000000

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 B-26 Marauder wheels, late grooved pattern, from Plusmodel, a resin set

A resin replacement for the wheels of a model of the Martin B-26 Marauder medium bomber in 1:72 scale, in the form matching later machines with a grooved tread pattern. Wheels from a kit tend to be split into two halves and the seam is sanded straight across the tread, so that once sanded the tire is left smooth. A resin casting comes in one piece, so the pattern stays readable, and the hub has crisper definition. It is not a model of an aircraft but an accessory for a part-built kit.

The real subject

The Martin B-26 Marauder was an American twin-engine medium bomber with radial engines and a relatively small, aerodynamically clean wing. Because of its high landing speed it had a reputation at first as a machine demanding to fly, but after the wing was modified and crew training improved it was among the aircraft with a very low loss rate relative to the number of sorties. The landing gear wheels went through changes during production, which is why an early and a later tread pattern are distinguished, in this case the grooved one.

Building and painting tips

Wash the wheels in lukewarm soapy water. The casting block tends to be at the point where the wheel meets the ground; cut it off with a saw and level the surface on sandpaper laid on glass, so that the model stands level. Sand wet, as resin dust is not to be breathed in. Spray the tire dark gray, as pure black takes away the shape at this scale, and set the hub apart in a metallic shade with a mask or a precise brush. The grooved pattern comes out when a very dark wash runs into it and the surface is then lightly gone over with a dry brush in a lighter shade.

Who the set is for

  • Builders of the B-26 Marauder bomber in 1:72 scale
  • Modelers who want wheels with no parting seam and with a readable tread
  • Building a later machine with the grooved tread pattern
  • More experienced builders used to working with resin and cyanoacrylate glue

The set is an accessory for a plastic kit. The base model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

In the tread pattern and the form of the wheel. The manufacturer carries more than one variant for this bomber, so compare the wheel with a photograph of the machine you are building.

The exact contents of the package are stated on the box. If you also need the tailwheel or the nosewheel, check for it on the box.

Cement for plastic will not hold on resin; use cyanoacrylate glue. The axle can be strengthened with a thin wire pin sunk into the landing gear leg.

Spray it dark gray, let a very dark wash run into the grooves and go over the surface with a dry brush in a lighter shade.

Last seen

PlusmodelPMOAL70421:72

1:72 B-26 Marauder kola pozdní drážkovaný vzor

1:72 B-26 Marauder wheels, late grooved pattern from Plusmodel is a set of resin wheels with a grooved tread for a model of the bomber. It is not a kit but an accessory.
In stock
6.36 €
ValomVAL720711:72

1:72 Fokker F.VIIb/3m (Japan, Italy)

The short-run kit Fokker F.VIIb/3m (Japan, Italy) in 1:72 scale from the Czech manufacturer Valom – a three-engine high-wing monoplane with markings for Japanese and Italian machines. The model is supplied unassembled and unpainted.
In stock
26 €
GunzeNGA09

NGA-09 Acrysion Gundam Assemble Color (Base Color) - Green Matt

NGA-09 Acrysion Gundam Assemble Color - Green Matt is a water-thinnable acrylic base paint from Gunze for building Gunpla: a deeper green shade for robots.
In stock
5.16 €
Maestro ModelsMMK72701:72

1:72 2 x pitot tube for Saab J-32A/S 'Lansen'

A pair of pitot tubes for the Saab 32 Lansen in 1:72 is a small replacement accessory for a plastic kit. It replaces the thick and easily broken part from the mold with a finer and more accurate shape.
In stock
7.56 €
ValomVAL720831:72

1:72 Fouga CM.170 Magister (FAF)

The Fouga CM.170 Magister (FAF) plastic kit in 1:72 scale from the manufacturer Valom. The French jet trainer with its characteristic butterfly tail.
In stock
15.60 €
Freedom Model KitsFMK160031:16

1:16 WWII SDKFZ 302 GOLIATH DEMOLITION VEHICLE WITH CART

Sd.Kfz. 302 Goliath with a transport cart is a plastic kit in 1:16 scale from Freedom Model Kits. The subject is the German remote-controlled demolition charge carrier of the Second World War. The model is supplied unassembled and unpainted.
In stock
29.16 €
Freedom Model KitsFMK160021:16

1:16 WWII GERMAN KETTENKRAD WITH CART AND GOLIATH

Freedom Model Kits 1:16 Kettenkrad with cart and Goliath is a large plastic kit of German half-track equipment of the Second World War.
In stock
64.76 €
ValomVAL720871:72

1:72 Fouga CM.170R Magister (BAF)

The Fouga CM.170 Magister (BAF) plastic kit in 1:72 scale from the manufacturer Valom. The French jet trainer with its characteristic butterfly tail.
In stock
12.60 €
IBG modelsIBG72U0731:72

1:72 Expert Set: Focke-Wulf Fw-190D-9

An accessory set for a model of the Fw 190D-9 fighter in 1:72 scale, offered under the designation Expert Set.
In stock
39.96 €
EduardED6320771:32

1:32 Mosquito FB Mk.VI nose guns

Eduard Brassin Mosquito FB Mk.VI nose guns 1:32 is a resin detail accessory for models of the fighter-bomber de Havilland Mosquito FB Mk.VI. It refines the armament in the nose of the fuselage.
In stock
27 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.