A Hobby Design chain set for the Yamaha YZR-M1 2009 in 1:12 scale — according to the name a combination of resin, photo-etched and metal parts.
Responsibility details are not available.
The chain set from Hobby Design is an extra for a model of the MotoGP machine Yamaha YZR-M1 from the 2009 season in 1:12 scale. The manufacturer gives a combination of resin, photo-etch and metal components in the name, that is, a make-up typical of extras that are to replace a simplified solution of the final drive with a more faithful rendering. The exposed chain with the sprocket tends to be one of the most watched places on a model of a racing motorcycle.
The Yamaha YZR-M1 in the specification for 2009 belonged to the era of the 800 cc MotoGP prototypes. The 2009 season wrote itself in golden letters for the factory team: Valentino Rossi won the world champion title on the M1 and his teammate was Jorge Lorenzo. The machine of that time was considered the benchmark for handling in the whole starting field.
Degrease the metal components with denatured alcohol before painting. When putting the drive together, mark the direction the chain runs in and check that the sprocket is in line with the rear wheel, as any deviation shows on a finished model. Guide the chain over the sprocket so that the upper run stays taut and the lower one slightly slack, as corresponds to a standing machine. Bring out the teeth of the sprocket with a dark glaze and then polish the edges of the teeth lightly with graphite. Fit the extra only after the paint of the rear swingarm is finished.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!