An add-on set for a model of the Japanese battleship Mikasa in 1:200 scale for the Merit 620004 kit. It contains a wooden deck, photo-etched parts and masking sheets.
Responsibility details are not available.
Mikasa was a Japanese battleship built at the turn of the twentieth century, that is, still in the era before the dreadnought type appeared. She became famous as the flagship of the Japanese fleet at the battle of Tsushima in 1905. She is preserved to this day as a museum ship, which makes her a rewarding modeling subject with readily available photographic reference.
This is a set of accessories for the Merit kit number 620004. According to the name it consists of:
The exact extent of the individual parts and where they go is given in the instructions from the manufacturer supplied with the set.
A wooden deck is laid on a flat, clean base, so clear the plastic deck of raised detail and unevenness in advance and try the part dry first. Photo-etched parts are held in the metal by thin tabs, which are cut through with a sharp blade on a hard surface; make the bends along a ruler and glue the parts with cyanoacrylate, as solvent cement for plastic will not join metal. Stick the masking sheets to the surface only just before spraying, press the edges down and apply the paint in thin coats so that it does not creep under the mask. Take the mask off while the paint is fresh; once it has cured completely there is a risk that it will pull the paint underneath away with it.
This is an add-on set for a kit. The ship model, paints, glue and rigging are not included in the delivery unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!