The photo-etched accessory set 1:200 USS Arizona part 1 - cranes from the manufacturer Eduard adds cranes in photo-etched sheet to a model of the battleship USS Arizona in 1:200 scale. It is an accessory for a kit already bought, not a model of the ship.
Responsibility details are not available.
The first part of the photo-etched range that the Czech manufacturer Eduard released for a model of the American battleship USS Arizona in 1:200 scale. According to the name, the set covers the deck cranes. It is not a kit but an accessory in photo-etched sheet, worked into a model already built or under way.
USS Arizona was an American battleship of the Pennsylvania class, commissioned in 1916 and destroyed on December 7, 1941 at Pearl Harbor. In her 1941 condition she carried a crane aft for handling the shipboard floatplane and the boats. Lattice structures of that kind are among the most striking details on a model, because they stand out in silhouette against the sky and every unnecessarily thick plastic member shows on them.
With cranes it pays to plan the sequence before you cut the first part off. A lattice member is often made up of several flat parts that have to be joined into a three-dimensional shape, and once the cyanoacrylate has set, putting it right is next to impossible. So assemble the parts dry first and try out the order of assembly. Remove them from the fret with a scalpel against a hard backing and sand the remainder of the tab down at once with a fine file. When gluing, work with a minimal amount of thin cyanoacrylate, ideally applied on the tip of a wire, and let the finished crane cure thoroughly before you seat it on the model.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!