1:24 Rotiform DIA 20 + Stance tires

Twenty-inch wheel discs of an American cut together with low-profile rubber, put together for models seated tight above the roadway.

Scale1:24
Product EAN5791111221648

Responsibility details are not available.

19.16 €
15.83 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A low-seated 20 with stretched rubber

A static stance, pronounced camber and rubber stretched over the edge of the rim – that is the language of a scene which spread from American West Coast culture into Europe around 2010. Sets described as Stance aim exactly here: they are not built to look fast, but to look low. A disc from the workshop whose name appeared at shows and in European meet halls gives it a deep dish and a legible drawing on top of that.

Twenty inches on an automobile model in this scale means a markedly taller disc than you are used to from ordinary kits, and the thin band of rubber around it matches that. Before you start gluing, try seating the wheel in the arch dry; with conversions the inner side of the fender tends to need sanding away or the axle pin shortening.

Work with paint is made easier by the parts coming separately. The center can be left matte dark and the outer ring polished to a metallic gloss, which is the combination this scene uses most often. Anyone wanting to be more restrained will reach for a uniform graphite or bronze color.

Resin takes fine sanding, but the tread pattern of the tire is sensitive to a heavy layer of paint. Apply the matte black shade thinned, therefore, and rather in two thin passes than in one heavy one.

One more period note on color: the golden shade that appeared on forged wheels around 2012 comes across as archaic today, whereas a dark graphite with a fine gloss holds the line of the latest seasons. Choose the shade of the brake calipers according to which wave you place your model in as well.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

These are tires with a lower and more stretched wall, which allow a greater camber of the wheel and a seating of the body closer to the ground.

Count on it. The point of collision tends to be the shock absorber and the inside of the arch, where a little material needs to be taken away.

With a thinned matte black in two thin layers; a heavy layer floods the pattern.

It is not. The other set from the manufacturer contains the discs only; here you get the rubber as well.

Last seen

Ukrainian Scale Cars Production (USCP)U24P098st1:24

1:24 Rotiform DIA 20 + Stance tires

Twenty-inch wheel discs of an American cut together with low-profile rubber, put together for models seated tight above the roadway.
In stock
19.16 €
Mr.PaintMRP-A017

MRP-A017 Exhaust Metal

Exhaust Metal is a dark metallic shade for exhausts and heat-affected parts. Water-thinnable Aqua range, pre-thinned.
In stock
3.16 €
Hobby DesignHD07-00861:24

1:24 Exhaust Pipe (dia. 86mm)

Exhaust pipe (86 mm) 1:24 is a detailing accessory from Hobby Design for reproducing the exhaust system of car models faithfully.
In stock
5.56 €
TamiyaTA87189

Panel Line Accent Color - Light Gray

Tamiya Panel Line Accent Color, Light Gray is a ready-mixed enamel wash (light gray) with a brush in the cap for emphasizing panel lines.
In stock
5.16 €
Number FiveN5-C217

Ascona Blue

A Number 5 modeling paint in the shade designated Ascona Blue, from a line named after automotive paints.
In stock
5.96 €
New WareNWAM13631:48

1:48 Yakovlev Yak-7B - BASIC Kabuki Masks (for Zvezda Kits)

The 1:48 Yakovlev Yak-7B masking set at the BASIC level is an accessory to a kit: it contains pre-cut masks, not model parts.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.