1:35 British WWII17pdr Tank/Anti-Tank Gun Ammo

Rounds for the British 17-pounder gun in 1:35 scale, that is for the towed anti-tank gun and for its tank form alike. An accessory for a vehicle interior and for a scene.

Scale1:35
Manufacturer PANZER ART
Product EAN8591111870955

Responsibility details are not available.

9.56 €
7.90 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The 17-pounder gun was the British answer to the strengthening German armor and was among the most effective anti-armor weapons the Allies deployed in Europe. The barrel has a caliber of 76.2 mm and with it an unusually large cartridge case, which gave the weapon a high muzzle velocity. It served in two forms: as a towed anti-tank gun on a splayed carriage and as tank armament. Among tanks it was given to the Sherman Firefly, the Achilles tank destroyer and the Challenger tank. The round is a fixed one, so the projectile is firmly joined to the cartridge case and the whole thing is conspicuously long compared with the more common types.

What the set offers

The set brings the ammunition of the 17-pounder gun in 1:35 scale. You will use it on a model with an open turret or an uncovered fighting compartment, in a gun position around a towed gun and loose in a scene where the crew is replenishing the supply from boxes.

  • Rounds of the British 17-pounder gun in 1:35 scale
  • The real subject served as a towed gun and as tank armament alike
  • Suitable for the Sherman Firefly, for the Achilles and for an artillery scene
  • The number and make-up of the parts are stated in the manufacturer's instructions

Building and painting tips

Cut the surplus material off with a sharp blade a little away from the part and sand the surface so that the base of the cartridge case stays flat and the round can be stood up. Wash and degrease before painting; choose the glue according to the material of the parts, and cyanoacrylate will serve as a universal choice. A metallic sheen on the cartridge case against a matte projectile gives the ammunition depth, and a colored band on the tip sets the individual kinds of projectile apart according to what the scene is meant to tell.

Who it is for

For builders of British and Allied vehicles in 1:35 scale and for makers of dioramas with artillery. Paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

To the British 17-pounder gun of 76.2 mm caliber, which served as a towed anti-tank gun and as the armament of tanks alike.

British and Allied vehicles in 1:35 scale, typically the Sherman Firefly, the Achilles tank destroyer or the position of a towed gun.

Rounds of the gun named. The number and make-up of the parts are stated in the manufacturer's instructions, and paints and glue are not included.

Choose the glue according to the material of the parts, and cyanoacrylate will serve as a universal choice. Wash and degrease the parts before gluing and painting.

Last seen

PANZER ARTSU35-0391:35

1:35 British WWII17pdr Tank/Anti-Tank Gun Ammo

Rounds for the British 17-pounder gun in 1:35 scale, that is for the towed anti-tank gun and for its tank form alike. An accessory for a vehicle interior and for a scene.
In stock
9.56 €
GunzeXHUG13

XHUG13 Aqueous Gundam Aerial Rebuild Blue, Semi-Gloss

A blue shade of the water-thinnable Aqueous Gundam Color line for the machine with the designation Aerial Rebuild. A semi-gloss finish, manufacturer code XHUG13.
In stock
3.96 €
Aires/QuickboostQB484611:48

1:48 M.S. 406 gun barrels and pitot tube

M.S.406 gun barrels and pitot tube (1:48, Aires/Quickboost) is a resin set of armament barrels and a pitot tube for the Morane-Saulnier M.S.406 fighter. A detail accessory for a kit in 1:48 scale.
In stock
3.56 €
MH modelsMHX720321:72

1:72 Short Sunderland Mk.V Canopy airbrush mask for Special Hobby

A masking set for the glazing of the Short Sunderland Mk.V in 1:72 scale deals with the extensive glazing of the pilot's cabin and the fuselage windows of this four-engine flying boat. The target kit is Special Hobby.
In stock
6 €
Voyager ModelPEA4061:35

1:35 WWII British Grant Medium Tank Track Covers(For TAKOM 2086)

Grant – track covers in 1:35 scale are a photo-etched add-on set for a plastic kit of the medium tank you already own, not a standalone model. The brass parts replace the coarse plastic fenders above the tracks. The set is cut for the Takom 2086 kit.
In stock
14.76 €
KelikKS480341:48

1:48 Israel Roundel - Acrylic 3mm (240x240mm) (190g)

A display plaque with the Israeli roundel 1:48 is a printed acrylic board on which you can stand a finished model to good effect.
In stock
20.76 €
Special HobbySH723391:72

1:72 DH100 Vampire Mk.I 'The First Jet Guardians of Neutrality'

Special Hobby 1:72 DH.100 Vampire Mk.I is an injection-molded plastic kit of the early British jet fighter in the service of neutral countries.
In stock
18.36 €
BelkitsBEL-DEC0111:24

1:24 Carbon Twill Weave (Belkits-Cartograf)

Carbon Twill Weave waterslide decal 1:24 from Belkits is a decal sheet with a faithful carbon fiber pattern in a diagonal weave for the bodies of car models. It is not a paint and not a kit.
In stock
12.36 €
1:35 M4 SHERMAN T-48 type workable tracks (3D printed)-25 %Stock ClearanceFavorite
RYE FIELD MODELRM30301:35

1:35 M4 SHERMAN T-48 type workable tracks (3D printed)

Workable T-48 type tracks for American M4 Sherman medium tanks in 1:35, made by 3D printing.
5 leftof 6
35.96 €26.96 € You save 9 €
Quinta StudioQD+351841:35

1:35 JGSDF Light truck Mitsubishi Type 73 Shin 3D-Printed & coloured Interior on decal paper (Trumpeter) (with 3D-printed resin parts)

Quinta Studio — the 3D-printed colored interior for the JGSDF Mitsubishi Type 73 Shin light truck (1:35, for the Trumpeter kit) is a set of pre-painted 3D-printed cab parts on backing decal paper, with resin parts added. You apply it like a decal, but it has real three-dimensional relief.
In stock
20.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.