1:48 A-10A Interior 3D Decal (for Italeri)

1:48 A-10A Interior 3D Decal is a colored three-dimensional interior from Quinta Studio printed on decal paper for a model of the A-10A attack aircraft in 1:48 scale. It is a cockpit accessory, not a kit. The set is cut for the Italeri kit.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591111000000

Responsibility details are not available.

26.76 €
22.12 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 A-10A Interior 3D Decal - a colored 3D interior, Quinta Studio

A three-dimensional, pre-colored cockpit interior on decal paper for a model of the A-10A in 1:48 scale. The elements are applied like decals, but on the model they create a raised relief with readable instruments and three-dimensional controls. It is exactly in 1:48 scale that this approach makes the most sense: the cockpit is large enough for the detail to be noticed, yet small enough that painting individual switches by hand is practically impossible without a magnifier.

What it is for

The interior of the A-10 consists of the instrument panel, two side consoles and the cockpit walls, an area that everyone sees on a model with the canopy open. The alternative tends to be a photo-etched set, which has to be bent, glued and painted, and flat etching never creates an impression of depth. The Quinta Studio set gets around that step: the finished coloring and the relief come from the factory, and the work shrinks to seating the parts and evening them out with varnish at the end. According to the maker the accessory is cut for the Italeri kit.

Usage tips

Paint the cockpit in a dark shade, let it mature and go over it with gloss varnish, because the elements have no adhesive layer of their own and hold badly on a matte base. Cut an element out as closely as possible, dip it in lukewarm water for about fifteen seconds and let it come free off the water. Slide it off the carrier paper onto the part and seat it with a soft brush, best from the middle out. Do not use a decal softener or a setting solution; their chemicals will attack the printed resin. Once it is dry, use a matte varnish so that the sheen of the carrier layer does not glare, and bring out the edges with a fine dry brush. The seat and the canopy frame are best completed separately; the set deals with the areas of the cockpit, not the whole interior, unless stated otherwise.

Who the set is for

  • Builders of the A-10A model in 1:48 scale.
  • Modelers who do not want to paint instruments under a magnifier.
  • Those looking for an alternative to a photo-etched cockpit set.
  • Anyone after a quick and reliable rise in the level of detail.

This is an accessory for detailing the cockpit, not a kit. The model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Etching is flat and has to be bent, glued and painted. This interior has a relief of its own and is colored from the factory; it is put on like a decal.

The set is cut for one particular kit, Italeri. Please check before buying that you have the matching model, as the shapes of the cockpit differ between kits.

A matte varnish is advisable. The carrier layer could otherwise glare unpleasantly in the cockpit and spoil the impression of scale.

Yes. The work is like applying decals, only with more care while dipping and seating.

Last seen

Quinta StudioQD480761:48

1:48 A-10A Interior 3D Decal (for Italeri)

1:48 A-10A Interior 3D Decal is a colored three-dimensional interior from Quinta Studio printed on decal paper for a model of the A-10A attack aircraft in 1:48 scale. It is a cockpit accessory, not a kit. The set is cut for the Italeri kit.
In stock
26.76 €
XtradecalX721051:72

1:72 Supermarine Spitfire PR.XIX/ Spitfire PR.19

Xtradecal 1:72 Supermarine Spitfire PR.XIX is a waterslide decal sheet with markings for models of the photo-reconnaissance version of the legendary fighter.
In stock
11.96 €
XtradecalX721451:72

1:72 RAF WWII m/s/grey code letters 24

A decal sheet with RAF code letters of the Second World War in the Medium Sea Grey shade, 1:72 scale. The letters match a height of 24 inches on the real aircraft.
In stock
8.36 €
XtradecalX720131:72

1:72 Panavia Tornado Update 1989

An additional sheet 1:72 Panavia Tornado Update 1989 from Xtradecal. An update sheet of markings for models of the European combat aircraft with variable-geometry wings.
In stock
6.36 €
EduardED3DL481821:48

1:48 Fw-190A-2 SPACE

Color three-dimensional elements of the SPACE range for the cockpit of the Fw 190A-2 in 1:48 scale. Only the backing paper is moistened and the element is fixed with PVA glue.
In stock
8 €
XtradecalX720311:72

1:72 BAe Hawk T.1/T.1A

Xtradecal BAe Hawk T.1/T.1A in 1:72 scale is a set of waterslide decals for models of the British BAe Hawk jet trainer in the T.1 and T.1A versions.
In stock
7.16 €
XtradecalX721301:72

1:72 Supermarine Spitfire Mk.Vb

Xtradecal 1:72 Supermarine Spitfire Mk.Vb is a waterslide decal sheet with markings for models of one of the most widespread versions of the famous fighter.
In stock
11.96 €
XtradecalX721551:72

1:72 BAC/EE Lightning

An Xtradecal decal sheet in 1:72 scale for the British BAC/EE Lightning interceptor. It is an accessory for a model, not a kit.
In stock
11.16 €
Quinta StudioQD321721:32

1:32 F8F-1 Bearcat 3D-Printed & coloured Interior on decal paper (Trumpeter)

3D colored interior for the F8F-1 Bearcat (1:32) is a set of 3D decals on backing paper for detailing the cockpit of a model of the American carrier-based fighter.
In stock
23.56 €
Quinta StudioQD321621:32

1:32 P-40N Warhawk 3D-Printed & coloured Interior on decal paper (Trumpeter)

Colored three-dimensional decals with the cockpit interior of the P-40N Warhawk fighter in 1:32 scale. The set is intended for the Trumpeter kit.
In stock
22.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.