The A6M bulkhead with the seat in the bottom position is a resin print for the Zero kit from Tamiya in 1:48 scale, with the seat captured at its lowest stop.
Responsibility details are not available.
The printed bulkhead with the seat replaces the matching group of parts in the cockpit and is prepared for the Zero kit from the brand Tamiya. The seat is captured at the lowest setting, so it suits a model with a closed canopy, where it is mainly the upper edge of the bulkhead that stands out from the pilot's compartment.
The A6M was powered by an air-cooled Nakajima Sakae radial. More interesting than the output, though, was the design of the airframe: the Japanese engineers reached for a light alloy and lightened every rib and bulkhead wherever they could. The result was a machine with a low wing loading that climbed and turned better than most of its rivals, but lacked pilot armor and self-sealing tanks. It was exactly this compromise that decided its fate in the second half of the war.
Thin prints are brittle, so handle them with soft-jawed tweezers. Remove the remains of the supports with a scalpel and polish the surface with a fine-grit sanding sponge. The material does not stand long exposure to direct sunlight, so do not leave the finished model on a windowsill.
The package holds the fittings of the pilot's compartment, not the plastic parts of the airframe.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!