1:48 Boeing F/A-18E Super Hornet

A photo-etched metal set for a model of the carrier-borne Boeing F/A-18E Super Hornet in 1:48 scale. It adds detail to the model that a plastic part cannot manage at this thickness.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

13.80 € 10.36 €
8.56 € without VAT
−25 % You save 3.44 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The F/A-18E Super Hornet is an American single-seat carrier-borne combat aircraft intended for service on aircraft carriers. It was created as an enlarged and reworked version of the earlier Hornet: it got a bigger airframe, angular air intakes and more hardpoints for stores. In design terms it is a machine that handles fighter duties as well as strikes against ground targets, so it turns up practically everywhere in today's naval aviation of the United States.

What photo-etch can do on a model

A photo-etched fret is a thin metal sheet from which the parts are cut, shaped and glued onto the model. Its strength lies precisely in the thickness: in 1:48 scale plastic cannot be molded as thin as the real subject would call for, whereas a metal part looks right even up close. It is used where the real machine has thin sheet metal or a fine structure, that is on belts and controls in the cockpit, on meshes, loops and access doors. What exactly the fret holds is given in the manufacturer's instructions.

How to work with photo-etch

Separate the parts with a sharp blade on a hard surface, do not break them out between your fingers. Make the bend over the edge of a bending tool or between two blades, so that it is straight along its whole length. Metal is glued with a small amount of cyanoacrylate, because polystyrene cement will not bond it. Before painting, wash the fret, degrease it and apply a primer. The set is drawn for one particular kit, so check with the manufacturer which 1:48 model it belongs to.

  • photo-etched metal parts for a model of the F/A-18E Super Hornet
  • 1:48 scale
  • a thickness an injection-molded part cannot reach
  • separating with a blade, shaping over an edge, gluing with cyanoacrylate
  • the metal needs degreasing and a primer coat before painting

Terms of supply

A photo-etched set is supplied. The kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A photo-etched metal fret. The model kit, paints and glue are not part of the delivery.

Cyanoacrylate in a small amount. Polystyrene cement will not hold a metal part.

It will not. The photo-etch is drawn to the parts of one kit, so check what it is intended for with the manufacturer.

For a modeler who is up for working with thin metal. A sharp blade, tweezers and a photo-etch bending tool come in handy.

Last seen

1:48 Boeing F/A-18E Super Hornet-25 %Stock ClearanceFavorite
EduardFE11941:48

1:48 Boeing F/A-18E Super Hornet

A photo-etched metal set for a model of the carrier-borne Boeing F/A-18E Super Hornet in 1:48 scale. It adds detail to the model that a plastic part cannot manage at this thickness.
2 leftof 4
13.80 €10.36 € You save 3.44 €
MontexMXKAM322011:32

1:32 Albatros D III

Masking set for the Albatros D.III in the large 1:32 scale complemented by metal barrels. It contains four masks for the national insignia; there is no cockpit canopy mask in it, because the machine had none.
In stock
21 €
Kovozávody ProstějovKPEX0411:72

1:72 PC-9 external fuel tank

An accessory external fuel tank for a model of the Pilatus PC-9 trainer in 1:72 scale.
In stock
8.76 €
MontexMXKAM322121:32

1:32 Fokker DrI

Masking set with two masks for the national insignia and with metal barrels for the Fokker triplane in 1:32. The fixed screen ahead of the cockpit neither slid nor hinged anywhere.
In stock
23.96 €
MontexMXKAM322081:32

1:32 Albatros D Va

Three vinyl masks for the national insignia and metal barrels for the Albatros D.Va in 1:32. The number of masks here is not set by the number of cockpit frames, because the cockpit has none.
In stock
25.56 €
MontexMXKAM321891:32

1:32 Bf 109F-4

Die-cut masking sheets for the Bf 109 in the F-4 version in 1:32 scale. They cover the cockpit canopy outside and inside and add three insignia masks.
In stock
16.76 €
MontexMXKAM321861:32

1:32 SPITFIRE VIII

Cut masks for the Spitfire Mk.VIII in 1:32 scale with two national insignia stencils and a pair of metal barrels for the 20 mm cannon.
In stock
19.96 €
MontexMXKAM321821:32

1:32 Bf 109E-3

Masking set for the Bf 109E-3 in 1:32 scale complemented by metal: two MG 17 machine gun muzzles and two barrels for the wing MG FF cannons. The glazing is covered outside and inside.
In stock
14.60 €
EduardBIG493391:48

1:48 Aichi D3A1 'Val'

Eduard Big Ed, Aichi D3A1 Val is a combined set of photo-etch and masks for models of the Japanese dive bomber in 1:48 scale.
In stock
20.80 €
MontexMXKAM481331:48

1:48 Bf 109E-3 – TAMIYA

The set for the Messerschmitt Bf 109E-3 in 1:48 scale brings films for the glazing from both sides, masks for the national insignia, decals and four turned metal barrels: two MG 17 machine guns and two MG FF cannons. For the Tamiya kit.
In stock
19.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.