1:48 Colorful Grey and White F9F-8 Cougars Part 1

1:48 Colorful Grey and White F9F-8 Cougars Part 1

26.36 €
Add to Cart

1:48 Colorful Grey and White F9F-8 Cougars Part 1

1:48 Colorful Grey and White F9F-8 Cougars Part 1 is a decal sheet from the publisher Furball Aero-Design with colorful markings for single-seat Cougars in the gray and white scheme. It is an accessory for a kit, not a model.

Scale1:48
Manufacturer Furball Aero-Design
Product EAN8591111000000

Responsibility details are not available.

26.36 €
21.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Decals 1:48 colorful Cougars in the gray and white scheme, part one (Furball Aero-Design)

The gray and white finish of American naval aviation was sober in itself, and the colored unit markings stood out on it all the more strongly: stripes on the tail surfaces, deeply colored tank tips and large fuselage numbers. The sheet concentrates on exactly this kind of single-seat Cougar and is designated as part one, with further sheets of the same focus following it. The publisher is Furball Aero-Design, an American specialist in decals for naval aviation.

The real subject

The Grumman F9F-8 was a single-seat carrier jet fighter with a swept wing, a later production version of the Cougar with a lengthened fuselage and a modified wing leading edge. It served with squadrons of the US Navy and the Marine Corps in the mid-1950s, that is at a time when carrier aircraft wore a combination of light gray upper surfaces and a white underside and units set themselves markedly apart with colored markings.

Usage tips

With white and light areas, watch the surface underneath above all; every irregularity shows through gloss clear. Apply colored stripes across the tail surfaces in sections and let them settle on a damp surface while they can still be moved. Check the symmetry of the two sides as you do; on large markings a deviation is conspicuous. Apply the decal softener with a fine brush from above and then do not interfere with the decal again. Once it has dried, go over the model with satin clear so that the difference in sheen between the decal and the finish is evened out.

Who the sheet is for

  • Builders of American carrier aircraft of the 1950s in 1:48 scale
  • Modelers drawn to strikingly colorful unit markings
  • Decal collectors assembling a whole series for one type
  • Those who want a model different from the schemes in the box

This is a decal sheet, an accessory for a kit you already own. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a decal sheet applied to a model that has already been built and painted.

It is the first part of a continuing range of sheets with the same focus. It is a standalone product; the other parts are not needed with it.

For the single-seat F9F-8, that is the later production version. Two-seat trainers are covered by other sheets from the publisher.

You will find the breakdown of schemes in the manufacturer's instructions for the sheet.

Last seen

Furball Aero-DesignFBDS48041:48

1:48 Colorful Grey and White F9F-8 Cougars Part 1

1:48 Colorful Grey and White F9F-8 Cougars Part 1 is a decal sheet from the publisher Furball Aero-Design with colorful markings for single-seat Cougars in the gray and white scheme. It is an accessory for a kit, not a model.
In stock
26.36 €
Two BobsTB482321:48

1:48 Boeing F/A-18F Super Hornet VX-9 Vampires CoNA

The 1:48 Boeing F/A-18F Super Hornet, VX-9 Vampires commemorative finish decal sheet from the maker Two Bobs is not a kit, but a set of decals. It brings the markings of a test squadron in a celebratory form.
In stock
16.76 €
Two BobsTB482331:48

1:48 J-10 Enter the Dragons Chinese Demo Team

The 1:48 Chengdu J-10, Chinese display team decal sheet from the maker Two Bobs is a set of decals for a finished model, not a kit. It brings the markings of machines in a striking display finish.
In stock
16.76 €
E.T. ModelE35-2011:35

1:35 US Army/MC M1A1 Main Battle Tank

A photo-etched set for a model of the M1A1 Abrams main battle tank in 1:35 scale from E.T. Model. An accessory for refining the detail of a plastic model, not a kit in its own right.
In stock
29.96 €
OmaskOMK340491:48

1:48 Fi 156C Storch mask (for Tamiya 61100 scheme A,B)

Omask 1:48 Fi 156C Storch mask is a set of self-adhesive painting masks for the cockpit glazing of the matching Fieseler Fi 156C Storch kit in 1:48 scale, with masks prepared for schemes A and B.
In stock
7.96 €
LACILAC1440421:144

1:144 Rolls Royce RB211-524H for Boeing 767

1:144 Rolls-Royce RB211-524H for the Boeing 767 is a resin accessory for models of airliners — the engine nacelle of the British powerplant in the form for the Boeing 767.
In stock
21.96 €
AiresAIR41241:48

1:48 F-14A Tomcat cockpit set

A resin detail set of the cockpit for the F-14A Tomcat in 1:48 scale from Aires . An accessory for a kit that raises the fidelity of the cockpit, not an airplane model.
In stock
29.60 €
A-26B bomb bay 1/32
-50 %
Favorite
SaleV-ED324541:32

A-26B bomb bay 1/32

A-26B bomb bay 1:32 is a photo-etched detail set for the bomb bay space of the twin-engined Douglas A-26B Invader attack aircraft. It is not an airplane kit but an accessory for a plastic model in 1:32 scale.
In stock
41.96 €20.92 € You save 21.04 €
Aires/QuickboostQB483421:48

1:48 MC.200 Saetta gun barrels

Quickboost MC.200 Saetta - machine gun barrels 1:48 is a resin set of replacement barrels for the onboard armament for models of the Italian Macchi C.200 Saetta fighter.
In stock
3.56 €
AiresAIR44451:48

1:48 F/A-22A Raptor wheel bays

The Aires 1:48 F/A-22A Raptor wheel bays is a resin detail set of the landing gear bays. It is not an airplane model but an accessory for a kit.
In stock
16.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.