1:48 Mi-8MT Hip-H EXPERT kabuki masks

1:48 Mi-8MT Hip-H EXPERT kabuki masks is a set of self-adhesive masking templates of kabuki paper for a model of the Mi-8MT helicopter in 1:48 scale. It is not a model but an aid for accurate masking before painting.

Scale1:48
Manufacturer New Ware
Product EAN8591111735377

Responsibility details are not available.

10.36 €
8.56 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Kabuki masks 1:48 Mi-8MT Hip-H, the EXPERT variant

This is a set of pre-cut masking templates from New Ware for a model of the Mi-8MT helicopter in 1:48 scale, in the variant designated EXPERT. The templates are cut from kabuki paper, a thin Japanese masking material that conforms well to slightly convex surfaces, holds along the whole edge and leaves no adhesive on the surface once removed. Two levels of the set are made, BASIC and EXPERT; check the extent of the particular level on the packaging.

What the set is for

Compared with an airplane, a helicopter has an unusually large area of glazing, and the frames around it are immediately visible on a finished model. With so many windows, a mask cut from tape by hand almost always goes astray somewhere and the frames then come out uneven in width. Pre-cut templates do away with that problem: you just peel the mask off, lay it on and spray.

How to work with the masks

  • Degrease the glazing first and let it dry thoroughly.
  • Move the templates with tweezers and press them down with a soft stick, especially in the corners.
  • Apply the paint in thin coats, so that it does not seep under the edge.
  • Take the mask off shortly after the paint has dried, not after several days.
  • Finally, inspect the edges of the frames against the light and finish them with a brush.

Who the set is for

For modelers who are building the Mi-8MT in 1:48 scale and want the masking done quickly and accurately. It is a typical accessory that builds nothing by itself but that you can tell on a finished model at a glance.

The package contains only masking templates. The model, paints and glue are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package contains only masking templates; the kit itself has to be bought separately.

Masks tend to be cut for a particular model, so check the target kit on the box of the set before you buy.

Both levels of the set are made alongside each other; check the extent of the masking of the particular level on the packaging.

Yes. Kabuki paper is commonly used on painted surfaces; just always take it off soon after the paint has dried.

Last seen

New WareNWAM10931:48

1:48 Mi-8MT Hip-H EXPERT kabuki masks

1:48 Mi-8MT Hip-H EXPERT kabuki masks is a set of self-adhesive masking templates of kabuki paper for a model of the Mi-8MT helicopter in 1:48 scale. It is not a model but an aid for accurate masking before painting.
In stock
10.36 €
OmaskOMK540061:48

1:48 Il-10 / B-33 mask (for Special Hobby)

Omask Il-10 / B-33 - masks 1:48 are self-adhesive spraying masks for painting the camouflage and markings of a model of the Ilyushin Il-10 attack aircraft, or of its license-built B-33 version. The masks are cut for the Special Hobby kit.
In stock
5.96 €
Red Fox StudioRFSQS-350131:35

1:35 Bell UH-1C (for Academy /Revell)

The Bell UH-1C in 1:35 is a 3D printed color instrument panel from Red Fox Studio on a self-adhesive backing — a realistic accessory for detailing the cockpit, not a kit. Intended for the Academy and Revell kits.
In stock
20.76 €
Firma4949A030/351:35

1:35 Empty cartridge case for 4.7 cm Pak K 36 (t)

Empty cartridge cases for the 4.7 cm Pak (t) in 1:35 scale is a set of 3D printed resin spent cases. It is a detailing accessory for dioramas, not a kit.
In stock
5.96 €
GunzeCL103

CL103 Black Hair Base Color Gloss

A gloss Mr.Color modeling paint with the designation CL103 and the name Black Hair, that is a black hair shade. It is listed as a base color that forms the lower covering layer.
In stock
3.40 €
New WareNWAM05771:144

1:144 Mask Mirage III/5 (MARK 1 MODELS)

The New Ware 1:144 Mask Mirage III/5 is a set of pre-cut self-adhesive masks for a tiny model in 1:144 scale. The masks are cut to the shape of the parts of one specific Mark I Models kit.
In stock
3.96 €
Master ToolsMT09978

Masking Tape Flauge Reel - 4 sets

A masking tape wound on a reel; the package contains four sets. A consumable supply for painting models, not a part for a model.
In stock
7.16 €
AiresAIR41561:48

1:48 Bf 109G wheels & paint masks

Bf 109G wheels and paint masks 1:48 is a resin set of wheels with masks from Aires for the German Messerschmitt Bf 109G fighter. The accessory raises the detail of a plastic kit; it is not a standalone airplane model.
In stock
8 €
EduardED356171:35

1:35 Leaves Fern / Kapraď I

Eduard Leaves Fern I 1:35 is a scenic accessory for a diorama: photo-etched brass fern leaves that the modeler finishes with paint.
In stock
8 €
RB modelRB35P33

21cm Ammunition for Morser 18

21 cm ammunition for the Mörser 18 is a detail set of ammunition rounds in 1:35 scale, intended for the heavy howitzer of 21 cm caliber.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.