Kladka jednoduchá + hák 8mm 3d print - 10 ks

An eight-millimeter single block with a hook, ten pieces in the package. A printed accessory for ship models in large scales.

Manufacturer Artillery models
Product EAN8591111009874

Responsibility details are not available.

1.96 €
1.62 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eight millimeters belongs on large scales

The bigger the block, the wider the range of scales in which it looks convincing, and the more details have to be right on it. A stated length of eight millimeters including the hook corresponds on a model in 1:48 to a piece just under forty centimeters long, and in 1:35 to roughly twenty-eight. Both are ordinary sizes for hoisting a lifeboat or on a cargo boom.

A single block has only one sheave, so on its own it does not multiply the force, it only changes the direction of the pull. That, though, is exactly what the crew needed it for most often: it led a line down from the mast to the deck, where it could be hauled comfortably. There are ten of them in the set.

Hanging it on the model

A block of this size will no longer be held by a drop of glue alone on a smooth surface. Either drill through the hook and run a wire eye through it, or set a metal ring into the deck that the hook really drops into. The joint then holds even under the tension of the rigging, which tends to be surprisingly strong.

  • A taut thread can tear off even a part that seemed firmly glued.
  • Drill the hole in the hook by hand; a powered drill will melt the resin.
  • The recommended thickness of line at this size is roughly 0.3 mm.
  • Paint the part before hanging it; afterwards you will not get at it.

The package contains the blocks only, without any other ship fittings. In large scales it is worth considering combining printed parts with metal rings and eyes, because metal takes a taut thread better than a thin layer of resin. A common coat of primer evens out the difference in color between the two materials.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Not on its own; it only changes the direction of the pull. The advantage arises only in combination with a second block.

Roughly from 1:48 upward. In smaller scales the block would look disproportionately massive.

Drill through the hook and run a wire eye through it, or set a ring into the deck. Glue alone will not hold a taut thread.

A thread around 0.3 mm in diameter. A thinner thread would look undersized with a block of this size.

Last seen

Artillery modelsARTB5004

Kladka jednoduchá + hák 8mm 3d print - 10 ks

An eight-millimeter single block with a hook, ten pieces in the package. A printed accessory for ship models in large scales.
In stock
1.96 €
Artillery modelsARTB3001

Kladka trojitá 1mm 3d print - 10 ks

Ten triple blocks 1 mm in size from 3D printing. The finest member of the line, intended for the running rigging of sailing ships in small scales.
In stock
1.96 €
Artillery modelsARTB2001

Kladka dvojitá 1mm 3d print - 10 ks

A bag with ten printed blocks with two sheaves, one millimeter in dimension. The finest step in this line.
In stock
1.96 €
Artillery modelsARTB3004

Kladka trojitá 4mm 3d print - 10 ks

Triple blocks 4 mm in size, the largest in this line. Ten 3D-printed pieces for the rigging of large sailing ships.
In stock
1.96 €
Artillery modelsARTB3003

Kladka trojitá 3mm 3d print - 10 ks

A set of ten triple blocks 3 mm in dimension. 3D printed for building the rigging of sailing ships in larger scales.
In stock
1.96 €
AberABRR441:35

1:35 Set of 2 NATO antennas with mount bases

The Aber set of 2 NATO antennas with mount bases, 1:35 is a metal detail set of two antennas with their bases for models of modern vehicles. A fine accessory, not a kit.
In stock
6.76 €
KelikRSK48-01521:48

1:48 AV-8 A Harier (Early) - Interior 3D-Decals (for Kinetic Kits)

AV-8 A Harrier (Early) Interior 3D Decals, 1:48 are colored 3D decals from Kelik for faithful detailing of the cockpit of the early AV-8 A.
In stock
23.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.