1:600 HMS Ship Utility Rail

Photo-etched ship railings in 1:600 scale for models of Royal Navy vessels take the place of the plastic parts of the kit with a thin metal structure.

Scale1:600
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched railings 1:600 for British ships (Artwox Model)

A metal accessory for ship kits, not a model. Photo-etched strips of railings in a form which, according to the name, matches Royal Navy vessels. They are cut to length for the particular deck and glued to a finished, varnished model.

Working with long strips

With photo-etched railings the main trouble tends to be length: the strip has to run along the whole edge of the deck and must not ripple. Before you start gluing, lay the strip on a flat surface and run the flat of a knife lightly over it, so that it loses the residual tension from the fret. Then go around the hull in stages: the straight stretches first and the curves of the bow and stern, where the material bends most, only at the end. Plan the joints between two strips where a superstructure, a boat or some fitting interrupts them anyway; in the middle of an open deck they would show.

Further fitting tips

Always remove the original plastic railings and sand the area, or the new etching cannot be brought into one plane. Butt the ends up exactly against the edge at the superstructures so that the railings carry on visually, and never leave them sticking out freely. Glue with a minute drop of super glue at the foot of a stanchion, transferred with a wooden stick. Paint over a primer meant for metal before gluing and only touch up with a fine brush after fitting. Once the railings are on, do not pick the model up by the sides; a fingerprint flattens the thin stanchions and they are hard to straighten again.

Who the set is for

  • Builders of British ships in 1:600 scale.
  • Modelers who want to take a model beyond out-of-the-box building.
  • More experienced enthusiasts of work with fine photo-etch.
  • Collectors assembling a fleet in one scale.

This is an accessory for a ship kit, not a kit on its own. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Plan it for a place where a superstructure, a boat or some fitting interrupts the railings anyway. In the middle of an open deck the joint would show.

It carries residual tension from the fret. Lay it on a flat surface and run the flat of a knife lightly over it before you start gluing.

Only after the hull has been varnished and weathered, as one of the last operations. After that the model is no longer held by the sides.

It is not, this is a universal form cut to measure. The length of the strips in the package is not stated here.

Last seen

Artwox ModelAW600351:600

1:600 HMS Ship Utility Rail

Photo-etched ship railings in 1:600 scale for models of Royal Navy vessels take the place of the plastic parts of the kit with a thin metal structure.
In stock
8.76 €
ReskitRS48-04621:48

1:48 AMX (AMX-T)

An accessory set in 1:48 scale for building the AMX aircraft, including the two-seat AMX-T version. The type of parts is given in the manufacturer's instructions.
In stock
8.36 €
AMMO of Mig JimenezA.MIG-2153

TURNED EARTH GROUND (100 mL)

Turned Earth Ground texture paste (100 ml) is an acrylic compound for creating freshly broken, lumpy soil on dioramas and bases.
In stock
6.76 €
ReskitRSU72-01951:72

1:72 Vought F-8E

An accessory set for a model of the Vought F-8E carrier-borne fighter in 1:72 scale. It replaces the exhaust nozzle from the kit.
In stock
8.76 €
EduardED352211:35

1:35 AMX 30/105

Eduard 1:35 AMX 30/105 is a photo-etched detail set for a model of the French AMX-30 tank with the 105 mm gun. A photo-etched accessory, not a kit.
In stock
8 €
Mr.PaintMRP041

Red Engine covers for aircraft

Mr.Paint Red Engine covers for aircraft is a red modeling paint on a lacquer base for aircraft engine covers, pre-thinned for the airbrush.
In stock
5.96 €
EduardSS1131:72

1:72 A-1H Skyraider

A photo-etched detail set A-1H Skyraider 1:72 from the Czech manufacturer Eduard. It is not a model - these are fine metal parts for refining the kit of the A-1H Skyraider.
In stock
3 €
MontexMXKAM481591:48

1:48 Fw 190A8 (snake)

Masking set for the A-8 version of the Fw 190A-8 in the snake finish. It covers the cockpit canopy outside and inside, adds two sets of national insignia and five turned metal parts: a pair of MG 131, a pair of MG 151 and a Pitot tube.
In stock
22.76 €
1:32 B83 nuclear bombs (2 pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05901:32

1:32 B83 nuclear bombs (2 pcs)

A pair of resin B83 thermonuclear bombs in 1:32 for American bombers and tactical fighter aircraft.
3 leftof 4
15.16 €11.36 € You save 3.80 €
U-STARUA80062B

Model whit corner engraving plate

An engraving template with corner shapes for modelers. It serves as a guide for a scribing tool when restoring panel lines and when engraving the edges of covers and hatches.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.