1:700 U.S.S Battleship BB-61 Iowa 1984 (For Trumpeter 05701)

1:700 U.S.S Battleship BB-61 Iowa 1984 (For Trumpeter 05701)

18.36 €
Add to Cart

1:700 U.S.S Battleship BB-61 Iowa 1984 (For Trumpeter 05701)

A veneer deck for the battleship USS Iowa BB-61 in her 1984 state in 1:700 scale from Artwox Model will replace the plastic deck with self-adhesive wooden veneer with the laying of the planks printed on it.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

18.36 €
15.17 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

USS Iowa BB-61 1984 veneer deck, 1:700 scale, Artwox Model

An accessory to a plastic kit, not a model of the ship. A wooden veneer with the printed laying of the deck planks and with a self-adhesive back is cut to the shapes of the decks of one particular kit, the Trumpeter 05701. On modernized battleships a wooden deck is one of the few conspicuously non-gray elements, so it has a great influence on the final impression.

The real subject

The USS Iowa was the lead unit of the class of the same name of American battleships, brought into service in 1943. The main armament consisted of nine 406 mm guns in three triple turrets, and the long slender hull was designed for the high speed that allowed her to sail with carrier formations. The 1984 state matches the period after a modernization in which the ship received Tomahawk and Harpoon guided missiles in container launchers, next-generation sensor systems and close-in defense systems. The original wooden deck was kept in the process.

Gluing tips and painting the surroundings

The modernized Iowa is largely in a uniform gray, so every transition between wood and paint stands out. So glue the veneer on only after the hull and the superstructures have been sprayed, when the paint is fully cured. Before gluing, sand the engraving of the planks on the plastic and degrease with alcohol. Pull the film off in sections and lay the veneer from the longitudinal axis toward the sides. If you need to spray something after it is glued on, mask the veneer with low-tack tape: ordinary masking tape can lift the thin layer of wood when it is pulled off.

Who the deck is for

  • Builders of modern American battleships in 1:700 scale.
  • Modelers who want the contrast of a wooden deck against uniform gray paint.
  • Those building the particular state of the ship from the 1980s.
  • Anyone interested in a higher level of detail without laboriously painting planks.

This is an accessory to a plastic kit, not a model of the ship. The kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

On the modernized Iowa, only after the hull and the superstructures have been painted. You avoid masking the wood and the transition from wood to gray paint comes out cleanly.

Yes, but only with low-tack tape. Strongly adhesive tape can lift the thin upper layer of wood when it is pulled off.

Yes, the original wooden covering of the main deck was kept even after modernization, which is why a veneer deck belongs to this state.

Last seen

Artwox ModelAW200481:700

1:700 U.S.S Battleship BB-61 Iowa 1984 (For Trumpeter 05701)

A veneer deck for the battleship USS Iowa BB-61 in her 1984 state in 1:700 scale from Artwox Model will replace the plastic deck with self-adhesive wooden veneer with the laying of the planks printed on it.
In stock
18.36 €
MASTERAM721441:72

1:72 McDonnell-Douglas T-45 Goshawk - Pitot Tube & Angle Of Attack probe

1:72 McDonnell Douglas T-45 Goshawk pitot tube and angle of attack probe is a turned metal set from the brand MASTER for a small scale. These are detail parts for a kit, not an aircraft model.
In stock
3.40 €
ŘOP o.s.MNFDT350151:35

1:35 T-34/76 Model 1941/42 (STZ) - Russian cavalry T-34

The decal set T-34/76 Model 1941/42 (STZ) - Russian cavalry T-34 carries Soviet markings of T-34/76 Model 1941/42 tanks from STZ production alongside cavalry units, in 1:35 scale.
In stock
7.96 €
Artwox ModelAW200491:700

1:700 U.S.S Battleship BB-62 New Jersey (For Trumpeter 05702)

A veneer deck for the battleship USS New Jersey BB-62 in 1:700 scale from Artwox Model will replace the plastic deck of the Trumpeter 05702 kit with wooden veneer with the laying of the planks printed on it.
In stock
18.36 €
Star DecalsSD35-C12541:35

1:35 M4A3E8 Sherman #4. Rice's Red Devils - 89th Tank Battalion in Korea 1950-53.

A decal sheet in 1:35 scale with markings for the American M4A3E8 Sherman tanks deployed in the Korean War with the unit nicknamed the Red Devils.
In stock
10.76 €
Star DecalsSD35-C13131:35

1:35 Windhund # 2. Panthers from Pz-Regiment 16 and Pz-Brigade 111

Windhund No. 2 - Panthers from Pz-Regiment 16 and Pz-Brigade 111 is a set of water-slide decals in 1:35 scale from Star Decals for the Panther tanks of the 116th Panzer Division.
In stock
8.36 €
MASTERAM321301:32

1:32 Hawker Hurricane Mk.IIb Browning .303 cal Barrel Tips & Bead Sight Mount

A set of turned machine gun barrel tips and a bead sight mount for the Hawker Hurricane Mk.IIb in 1:32 scale from MASTER. The metal parts replace the blunt plastic barrels in the wing and the small sight on the nose.
In stock
8.36 €
KineticK481541:48

1:48 F-16A MLU Belgium Dream Viper

F-16A MLU Belgium Dream Viper is an injection-molded plastic model of this upgraded Belgian fighter in a striking display camouflage, in 1:48 scale from the maker Kinetic. The model is supplied unassembled and unpainted.
In stock
53.56 €
FriulmodelATL-641:35

1:35 PzKpfw. I F

Friulmodel 1:35 - metal tracks for the PzKpfw. I Ausf. F is a set of workable white metal tracks for models in 1:35 scale - individual links joined by pins that replace the kit tracks.
In stock
23.96 €
HatakaHTK-C014

Sand-Yellow (RLM79a)

A modeling paint from Hataka, from the Orange Line range, a sand yellow shade after the German designation RLM 79a.
In stock
1.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.