1:72 WWII U.S. Navy Wheel chocks

Resin wheel chocks for American naval aviation of the Second World War in 1:72 scale are a diorama accessory to a finished model, not a kit.

Scale1:72
Manufacturer Brengun
Product EAN8591111774291

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

US Navy wheel chocks 1:72 (Brengun)

This small resin set from the Czech maker Brengun in 1:72 scale holds wheel chocks of the kind used by American naval aviation in the Second World War period. It is not an airplane model or a kit: these are accessory castings that are placed under the wheels of a model that is already finished, or into a diorama.

What the chocks were for

A parked aircraft was not secured with its brakes but with chocks placed on both sides of the main wheels. On a carrier deck and at field airfields that was the only reliable safeguard against a machine rolling. The chocks tended to be wooden, often joined by a rope or a strap so that the crew could pull them out in one go. On a model they look unobtrusive, but it is precisely details like these that distinguish a displayed model from a piece of plastic on a stand: a viewer subconsciously recognizes that the aircraft is standing because it is secured.

Tips for working and painting

The castings are small, so work with them over a surface and not over a carpet. First wash them in warm soapy water to remove the mold release agent. Cut the casting block off with a sharp knife, sand the area and do not forget that the underside of the chock has to be flat so that it sits on the surface. The painting is rewarding: a base shade of weathered wood or gray, a dry brush on the edges, a dark wash into the joints and a light dusting of pigment at the foot. A chock is never glued hard to the tire but to the base of the diorama.

Who the set is for

  • Builders of American carrier aircraft in 1:72 scale
  • Makers of dioramas with parked equipment
  • Modelers who want to give a finished model the feel of a real scene

This is an accessory set in resin, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They are placed under the wheels of a parked aircraft. The model thereby gains the logic of a real scene: the machine is standing because it is secured, rather than merely sitting on a stand.

Sets of wheel chocks tend to be conceived so as to cover the main landing gear of a model. Check the contents of the package before ordering to be sure.

The real thing was most often wooden. A base shade of weathered wood, a dry brush on the edges, a dark wash into the joints and a fine dust pigment at the foot of the chock all work well.

Glue them to the base of the diorama rather than to the tire. The wheel then stays clean and the chock looks naturally propped up rather than grown on.

Last seen

BrengunBRL721621:72

1:72 WWII U.S. Navy Wheel chocks

Resin wheel chocks for American naval aviation of the Second World War in 1:72 scale are a diorama accessory to a finished model, not a kit.
In stock
7.96 €
Aires/QuickboostQB726361:72

1:72 Yak - 1B exhaust

Quickboost 1:72 exhausts for the Yak-1B is a resin detail set with faithfully cast exhaust stacks. It is not an aircraft model but an accessory for the basic kit.
In stock
4.76 €
1:48 Vought F-8J Crusader-25 %Stock ClearanceFavorite
Hobby 2000H2K480401:48

1:48 Vought F-8J Crusader

The plastic kit of the Vought F-8J Crusader in 1:48 scale from the brand Hobby 2000 covers the American supersonic carrier fighter.
12 leftof 25
39.96 €29.96 € You save 10 €
TamiyaTA81368

XF-68 NATO Brown 23ml

Tamiya XF-68 NATO Brown is an acrylic modeling paint in the flat brown shade of the three-part NATO camouflage, a 23 ml pot. It is an acrylic thinned with water or X-20A thinner (not the enamel version) — it is not a kit but a paint.
In stock
3.40 €
MontexMXSM484341:48

1:48 Ki-61 II HIEN

Die-cut masks for the canopy frames of the Japanese Kawasaki Ki-61-II fighter in 1:48, for both sides of the clear part. Taken from the kit by RS Model.
In stock
4.76 €
ReskitRS72-03781:72

1:72 Boeing P-8A Poseidon wheels set (weighted)

Boeing P-8A Poseidon wheels set (weighted) (1:72) is a resin 3D printed set of wheels with flattened tires for a model of the P-8A Poseidon maritime patrol aircraft from Reskit. It is a detail accessory.
In stock
12.76 €
Special MaskM720391:72

1:72 Gloster Meteor Mk.8/9 MASK

Pre-cut masks in kabuki film for a model of the British Gloster Meteor Mk.8/9 fighter in 1:72 scale. For the cockpit glazing and the wheels.
In stock
4.36 €
1:32 Panavia Tornado GR.4 interior-25 %Stock ClearanceFavorite
EduardED329811:32

1:32 Panavia Tornado GR.4 interior

The 1:32 photo-etched interior set for the Panavia Tornado GR.4 brings fine metal parts for the cockpit and the internal fittings of a model. It is an accessory, not a kit of the aircraft.
2 leftof 3
23 €17.24 € You save 5.76 €
Amazing ArtAMA1539

MASKING TAPE 2mm 18m

Amazing Art masking tape 2 mm x 18 m is a narrow, flexible kabuki tape for precise masking of curves, transitions and fine lines when spraying paint.
In stock
1.96 €
EduardED6723311:72

1:72 MiG-29A ejection seat 3D-printed

An ejection seat for the MiG-29A in 1:72 scale from Eduard. A resin set made by direct 3D printing, a fine detail of the seat for the cockpit of the fighter.
In stock
6 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.