FN FAL, 1:35, 5 pcs — a 3D-printed resin set of five FN FAL weapons in 1:35 scale from GINGER CAT.
Responsibility details are not available.
A 3D-printed resin set of FN FAL weapons in 1:35 scale from GINGER CAT. The manufacturer gives five pieces in the package. The weapons can be put into the hands of figures, leaned against a wall, laid on the bed of a vehicle or placed around a scene; in the same sub-line the manufacturer also lists other small arms, so a whole patrol can be armed consistently.
The FN FAL is a Belgian automatic rifle in 7.62 mm NATO caliber from the 1950s and one of the most widespread weapons of the second half of the twentieth century. It was nicknamed the right arm of the free world, because dozens of states from Britain to Latin America adopted it under license or through deliveries. It fought in Africa, in the Middle East and in the Falklands, where as it happens both sides used it. For a modeler that means a very wide range of uses.
3D-printed parts are small and brittle: separate them with a fine-tooth saw or with nippers and level the remains of the print supports with a fine file. They are glued with cyanoacrylate glue (super glue); solvent cement for plastic does not hold. Before painting, spray a thin coat of primer, as a heavy coat would drown the detail.
The accessory is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!