A range set of fine diameters, 0.5 to 0.7 mm. Hex heads with a straight slot in graded sizes in one package.
Responsibility details are not available.
This package does not cover one size but a graded band from five to seven tenths of a millimeter. The practical point is simple: on a single machine not all the joints are the same, and anyone who buys a single diameter will sooner or later use it where it does not belong. A graded band makes it possible to choose by the place, not by what is left over.
The range designation in the name marks out the extreme values, and the intermediate step lies between them. The set therefore also covers six tenths of a millimeter, a size that is not available on its own in this version. For a builder that is substantial information: if you need precisely that intermediate size, the way to it leads through the range package.
It is best to start with the largest size and work down. Large heads belong on the load-bearing points that set the overall composition, and once those fit, the finer joints are added around them. The reverse approach leads to the small heads being spread out evenly and the model acquiring a machine-regular, that is unconvincing, character.
Do not mix the range in one dish. A difference of two tenths of a millimeter cannot be judged by the naked eye, and a single mix-up means the head either floats in the hole or does not go into it at all and the rim crumbles.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!