A styrene section in the shape of the letter H, 2.00 x 2.00 x 350 mm, by AK Interactive, with 4 pieces in the package according to the name. Stock for posts, frames and stiffeners.
Responsibility details are not available.
A section with an H-shaped profile in which both sides are the same, here 2.00 x 2.00 mm. The length is 350 mm and according to the name there are 4 pieces in the package. The material is styrene. It is stock for scratchbuilding and for modifying finished models, that is material from which you cut and glue a part to your own design. A symmetrical section behaves the same in both axes, so it suits vertical elements that are meant to look the same from every side.
A medium section cuts well by scoring and snapping, but always level the ends with a file so that a post stands square and does not rub against the base with an edge. Styrene is joined with a thin cement for polystyrene that is drawn into the joint by capillary action; with vertical elements glue against a square and let the joint cure undisturbed. When you are building several posts of the same length, set up a stop and cut them all at once, and the structure will come out regular. The inner corner between the web and the flange is a good place both for the glue to run into and for a later wash, which gives the section depth. Before painting, a light sanding and a thin base are enough.
For builders of dioramas and scenes, for modelers who design their own parts and for anyone who needs a symmetrical structural element of medium section. A design of your own and basic experience of cutting and gluing plastic are assumed.
When cutting, work on a mat and protect your eyes, and clear the offcuts away safely.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!