1:72 Ki-43 II Ko/Otsu 3D-Printed & coloured Interior on decal paper (Special hobby)

1:72 Ki-43 II Ko/Otsu 3D-Printed & coloured Interior on decal paper (Special hobby)

5.16 €

1:72 Ki-43 II Ko/Otsu 3D-Printed & coloured Interior on decal paper (Special hobby)

Colored printed elements of the pilot's compartment for a model of the Ki-43-II Ko/Otsu in 1:72 scale, measured for the Special Hobby kit.

Scale1:72
Manufacturer Quinta Studio
Product EAN9991117369119

Responsibility details are not available.

5.16 €
4.26 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Ki-43 is a Japanese fighter of the Second World War with a radial engine, built around low weight and exceptional agility. The price was weaker armament and poor protection, so the pilot relied on the turn rather than on the toughness of the machine. The second production series carried a more powerful engine and gradually better protection as well; the designations Ko and Otsu distinguish two sub-variants within that series.

What the set offers

The set brings colored printed elements of the pilot's compartment in 1:72 scale, measured for the Special Hobby kit. The elements are three-dimensional and already colored, so they do away with laboriously painting and shading the small details of the cockpit with a brush. They are carried on sheets of decal paper, from which an element is slid into place after a short soak.

Application

The elements have no adhesive layer of their own. Wash the surface, degrease it and coat it with gloss varnish, that is a layer of the Future, Klear or Tamiya X-22 type, on which an element holds reliably. Cut the element out of the sheet, dip it in lukewarm water for about fifteen seconds, let it soften and slide it off the backing paper into place. Adjust the position with a brush while the surface is still wet, soak the excess water up with a cloth and press the element down with a soft tool so that it settles into the recesses too. On an uneven surface a drop of super glue helps. Do not use a decal softener or a decal fixer, as these chemicals attack the printed resin. Finish the cockpit and close it up only once all the elements are in place.

Terms of supply

A set of elements for the pilot's compartment is supplied. The kit of the aircraft, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. Dip the cut-out element in lukewarm water for about fifteen seconds and slide it off the backing paper into place. Do not use a decal softener or a decal fixer, as they would damage the print.

The Ki-43-II Ko/Otsu model in 1:72 scale from Special Hobby. With another kit expect to fine-tune the shapes.

The elements are already colored, so the main details do not have to be painted. The surface does have to be washed, degreased and coated with gloss varnish, otherwise an element will not take hold.

They are Japanese designations distinguishing two sub-variants of the second production series of the Ki-43 aircraft.

Last seen

ReskitRSU32-01011:32

1:32 EJECTION SEAT MB MK.10LH FOR HAWK T.2,67,100/102,127,CT-155 (3D PRINTING)

Reskit 1:32 MB Mk.10LH ejection seat is a 3D-printed resin seat for models of the Hawk trainer aircraft (the T.2, 67, 100/102, 127 and CT-155 versions).
In stock
14.76 €
ReskitRSU32-01831:32

1:32 MiG-29 Fulcrum exhaust nozzles for Trumpeter kit (3D Printed)

3D-printed engine exhaust nozzles for a MiG-29 model in 1:32 scale from Trumpeter. They replace the parts from the kit with a more faithful shape and thin edges.
In stock
41.96 €
1:35 CH-54A Tarhe pilots Early in a standing position (1962-1968) (scene 1)-25 %Stock ClearanceFavorite
ReskitRSF35-00121:35

1:35 CH-54A Tarhe pilots Early in a standing position (1962-1968) (scene 1)

A standing CH-54A Tarhe crew in early gear , scale 1:35: figures to stand beside the helicopter in a diorama scene.
4 leftof 6
30.36 €22.76 € You save 7.60 €
MAiMMAIM350061:35

1:35 Modern German KSK Soldier in Afghanistan - this Way!

A resin figure of a modern German KSK soldier in Afghanistan in 1:35 scale from MAiM: a character in a pose pointing out the direction.
In stock
13.56 €
Master BoxMB351861:35

1:35 Maid café girls - Nana and Momoko

Master Box Maid Café Girls, Nana and Momoko (1:35) is a set of two unpainted plastic figures of waitresses in the costume of a Japanese café.
In stock
9.56 €
WolfpackWD320041:32

1:32 F4F-4 Wildcat part 1 - Carrier based Wildcats in the Pacific

1:32 F4F-4 Wildcat part 1 - Carrier based Wildcats in the Pacific is a decal sheet from the Wolfpack brand for a model of the Grumman F4F-4 carrier fighter.
In stock
20.76 €
ReskitRSU48-01111:48

1:48 McDonnell-Douglas FG.1/FGR.2 Phantom II closed exhaust nozzles

Closed exhaust nozzles for the Phantom II FG.1 and FGR.2 are a resin accessory set in 1:48 scale from the manufacturer Reskit. It is not an aircraft model, but a replacement for parts in a kit.
In stock
19.56 €
EduardED332391:32

1:32 Polikarpov I-16 Type 10 seatbelts STEEL

Polikarpov I-16 Type 10 seatbelts STEEL 1:32 are steel, color-printed photo-etched seat belts from Eduard for a model of this Soviet fighter. It is an accessory, not a model.
In stock
6 €
1:48 Lockheed-Martin F-16C Block 25 seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE10491:48

1:48 Lockheed-Martin F-16C Block 25 seatbelts STEEL

Eduard 1:48 F-16C Block 25 seatbelts STEEL : color-printed steel seat harness belts for the seat of an F-16C model in 1:48 scale from the Czech manufacturer Eduard.
Last one!of 2
6 €4.52 € You save 1.48 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.