1:72 M1127 M-ATV CROWS w/M153 Remote Weapon Station w/XZL 16.00 X R20 Wheel set

1:72 M1127 M-ATV CROWS w/M153 Remote Weapon Station w/XZL 16.00 X R20 Wheel set

25.16 €
Add to Cart

1:72 M1127 M-ATV CROWS w/M153 Remote Weapon Station w/XZL 16.00 X R20 Wheel set

A set for the American M-ATV armored vehicle with the M153 CROWS remote controlled weapon station and off-road wheels of the size 16.00 R20, in 1:72 scale.

Scale1:72
Manufacturer Gallery Models
Product EAN8591111121058

Responsibility details are not available.

25.16 €
20.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The M-ATV is an American wheeled armored vehicle of the MRAP family, that is of machines built mainly against mines and improvised devices. It differs from the heavier vehicles of the same family in that it was designed as an off-road machine from the start: it has a shorter wheelbase, great wheel travel and independent suspension, so that it can get off hard-surfaced roads and into the mountains. The crew is protected by the shaped lower part of the hull, which deflects the blast to the sides, and by resistant glazing.

The weapon station and the wheels

The M153 CROWS station is remote controlled: the gunner operates it from inside the vehicle through a screen and a controller, so he does not have to go out into a turret. Besides the weapon it carries a camera head, thanks to which the surroundings can be observed at night as well and aim can be taken from cover. The wheels with off-road tires of the size 16.00 R20 have a deep tread and a tall sidewall; it is exactly the tires that are noticeable at first glance on this vehicle, so it pays to give them time on a model.

Building and painting tips

Rid the parts of surplus material and of the marks of production, sand the mating surfaces and try the assembly dry before you reach for the glue. Choose the glue according to the material of the parts and according to the manufacturer's instructions. Glue the wheels on so that all four stand on a surface, and if you are going to suggest a flattening of the tire, aim it at the ground. Wash and degrease the surface before painting.

Who it is for

It will be appreciated by modelers of contemporary American machines and by collectors of small scales, where a finished piece takes up little room in a display case. Paints, thinner, glue and tools are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a remote controlled weapon station. The gunner operates it from inside the vehicle through a screen and a controller and does not have to go outside in order to fire.

It is the size of the off-road tires. Wheels with these tires have a tall sidewall and a deep tread.

They are not. The parts have to be cleaned up, glued together and varnished. The extent of the parts in the package is given in the manufacturer's instructions.

They are not, unless stated otherwise. Prepare them according to the material of the parts and the finish you choose.

Last seen

Gallery ModelsGH72A061:72

1:72 M1127 M-ATV CROWS w/M153 Remote Weapon Station w/XZL 16.00 X R20 Wheel set

A set for the American M-ATV armored vehicle with the M153 CROWS remote controlled weapon station and off-road wheels of the size 16.00 R20, in 1:72 scale.
In stock
25.16 €
AIMSAIMS48P0041:48

1:48 Dornier Do-17 Z-6 - Nose (designed to be used with ICM Do-17 Z-10 kits)

A resin nose for converting the Dornier Do 17 night fighter to the Z-6 version in 1:48 scale is fitted without cutting into the fuselage. Target kit: ICM Do-17 Z-10.
In stock
4.76 €
1:32 GBU-31 (V) 2/B Thermally Protected Bombs U.S. Navy (2pcs) (F/A-18, AV-8B, F-14D) (3D Printed)-25 %Stock ClearanceFavorite
ReskitRS32-04641:32

1:32 GBU-31 (V) 2/B Thermally Protected Bombs U.S. Navy (2pcs) (F/A-18, AV-8B, F-14D) (3D Printed)

A pair of GBU-31 bombs in the naval thermally protected version, 1:32 scale from Reskit is, according to the name, made by 3D printing.
2 leftof 4
16.36 €12.28 € You save 4.08 €
Kits-WorldKWM3210181:32

1:32 Northrop CF-5E / F-5E Tiger II - Canopy and Wheel Masks (designed to be used with Kitty Hawk kits)

Masks for the cockpit canopy and for the wheels for a model of the CF-5E or F-5E Tiger II in 1:32 scale, cut for Kitty Hawk kits.
In stock
7.96 €
1:72 SUU-16A 20mm Gun Pod (Open Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)-25 %Stock ClearanceFavorite
ReskitRS72-04681:72

1:72 SUU-16A 20mm Gun Pod (Open Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

The Reskit SUU-16A gun pod with an open gun bay in 1:72 scale is a 3D-printed cannon pod for the wing pylons of the Phantom, supplied one piece per package.
3 leftof 6
10.76 €8.08 € You save 2.68 €
1:32 AN / ALQ-87 ECM PODS LATE TYPE (2 PCS) (F-4, F-111, AC-130) (3D PRINTING)-25 %Stock ClearanceFavorite
ReskitRS32-04421:32

1:32 AN / ALQ-87 ECM PODS LATE TYPE (2 PCS) (F-4, F-111, AC-130) (3D PRINTING)

AN/ALQ-87 jamming pods of the late type in 1:32 scale, two pieces , are a 3D printed resin accessory by Reskit for models of the F-4, F-111 and AC-130.
4 left
16.36 €12.28 € You save 4.08 €
AberABR350L341:350

1:350 Set of 16 pcs 102 mm QF Mk.V barrels for Royal Navy

Turned 102 mm QF Mk.V barrels in 1:350 scale from the maker Aber. A set of 16 metal barrels for Royal Navy ships.
In stock
6.76 €
SuyataSUSW-0031:35

1:35 German Kleines Kettenkraftrad (German Motorcycle Tractor & Combat Crew of 3)

Kleines Kettenkraftrad with crew 1:35 is a kit of the German tracked motorcycle tractor from Suyata with figures of a three-man crew.
In stock
14.76 €
1:48 SUU-16A 20mm Gun Pod (Open Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)-25 %Stock ClearanceFavorite
ReskitRS48-04681:48

1:48 SUU-16A 20mm Gun Pod (Open Gun Bay) Wings Mounting For F-4 'Phantom II' (C, D) (1pc) (3D Printed)

1:48 SUU-16A, the pod with an open gun bay from Reskit. A striking 3D printed store revealing the weapon inside, one piece for the wing pylon of the Phantom II.
2 left
14.76 €11.08 € You save 3.68 €
Artwox ModelBW10004A1:350

1:350 US Aircraft Carrier CV-8 Hornet Blue Wooden Deck (for Trumpeter 05601)

1:350 USS Hornet CV-8 - a wooden deck in the blue finish from Artwox Model is a self-adhesive veneer with pre-printed plank laying in a dark blue shade. The veneer is cut for the flight deck of the Trumpeter 05601 kit.
In stock
46.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.