The technical stepladder for the MiG-29 1:32 is a 3D printed resin model of a technical stepladder for the maintenance of the MiG-29 aircraft in 1:32 scale as an accessory for a diorama.
Responsibility details are not available.
The set contains a 3D printed resin model of a technical stepladder cut for work on the MiG-29 aircraft. From the universal technical stepladder by the same manufacturer it differs precisely in being listed for a particular type. It is not a model of an aircraft but a piece of ground equipment for an airfield scene.
Maintenance of the MiG-29 tactical fighter calls for access to the fuselage spine, to the wing root and to the engine section. A technical stepladder with a platform gets the technician there safely and without leaning on the skin of the aircraft. At Soviet and Russian bases these ladders were ordinary equipment and stood by the machines at every inspection. In a diorama they give the scene a story and explain the presence of ground personnel by the aircraft.
First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Equipment beside an aircraft comes out best with weathering: a dark wash into the gaps, dust with dry pigment and scuffed spots suggested with a metallic shade.
The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
