A cutting tip for a heated tool divides plastic with heat instead of pressure; the device it belongs in is given directly in the name of the item.
Responsibility details are not available.
This tip is not meant to impress but to pass through. The heated blade part cuts through plastic by melting the material ahead of it, and therefore no pressure arises that would break or split a thin wall. It suits wherever a saw would bind, a knife would risk cracking and a hot wire cutter would not reach the place.
A cut with heat leaves a melted edge, so reckon with having to level the edge and possibly fill it. Lead the tool slowly and let the heat work; when pushed, the tip bends and the mark runs off the line. Mark the path out beforehand with a pencil or a light scratch, because melted material quickly obscures the place you are looking at. Reckon also with the fact that the separated part comes out slightly smaller than the original outline, and leave yourself room for leveling it later.
For advanced builders who rework parts beyond the instructions and open up closed spaces. Cutting plastic gives off a strong smell, so ventilate and let the tip cool freely after work away from flammable objects. Neither the material of the tip nor the extent of the delivery is given in the name of the item; the target device, by contrast, is captured in it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!