Model Craft masking tape, 18 mm wide, 18 m roll — a wide modeling tape for quickly covering larger areas when spraying or brushing. A modeling supply, not a kit.
Responsibility details are not available.
Modeling masking tape, 18 mm wide, with an 18-meter roll. It is used to cover areas that should stay in their original shade during painting — canopies, wheels, cockpits, glazing, and the dividing lines of two-tone camouflage. It is not a kit or a model accessory, but a modeling supply that you use again and again while painting.
The difference is significant, and many people underestimate it. Ordinary office or packing tape has high tack — when pulled off, it willingly rips off the layer of paint or primer underneath, turning hours of work into a repair job. Modeling tape has low, controlled tack: it holds firmly enough to prevent paint from bleeding underneath, but comes off cleanly, without leaving adhesive residue. It also has a cleanly cut, sharp edge, so the transition between colors is crisp rather than ragged, and the paper backing is pliable — it can be pressed onto a shaped surface.
Always press the tape down with a fingernail or a toothpick along the edge where the color transition will occur — that is exactly where the quality is decided. Spray in thin coats perpendicular to the edge, so paint does not get pushed under the tape. Remove it while the paint is only dry to the touch, and pull it back over itself at a shallow angle, not straight up.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
