A silicone mold with sci-fi motifs, run in the designation for 1:48 scale. It serves for making your own repeating elements for a model or for a diorama.
Responsibility details are not available.
A silicone mold is an aid, not a finished part. You press modeling putty into it or pour a casting compound into it and gain an element that you can repeat as many times as you need. This mold carries sci-fi motifs and the designation of the item ties it to 1:48 scale, that is to the size at which the resulting elements are usable on a model or in a scene. Which particular shapes the mold contains and how many of them there are is not stated here.
Silicone has the advantage that a shaped putty releases from it even without treating the surface, and that it bends, so the removal is managed without damaging the detail. Press the putty firmly into the recesses so that it gets into all of them, and draw off the excess. Remove it only after it has hardened enough, otherwise the thin parts will stretch. Then clean the finished element up, cut the excess at the edges away with a sharp blade and finish the surface off with sandpaper.
For builders of scenes and dioramas who need more of the same technical elements and do not want to repeat them laboriously by hand. It finds a use in building sci-fi subjects on the base of an ordinary kit as well, where technical surfaces and details are filled in.
Modeling putty, casting compound, paints and glue are not part of the delivery, unless stated otherwise. Choose a suitable putty and the hardening procedure according to the instructions of its own manufacturer.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!