Tamiya

151 products
Product filtering
up to €
TamiyaTA74127

Fine Pivot Drill Bit 0.6mm (Shank Dia. 1.0mm)

Tamiya Fine Pivot Drill Bit 0.6 mm is a fine drill bit with a standardized shank of 1.0 mm diameter. Thanks to it you do not have to change the collet of the holder when changing the bit.
In stock
4.36 €
TamiyaTA74116

Fine Pivot Drill Bit 0.5mm (Shank Dia. 1.0mm)

The Tamiya fine pivot drill bit 0.5 mm has a thin cutting edge and a thicker 1.0 mm shank, which increases its resistance to breaking.
In stock
4.36 €
TamiyaTA74096

Fine Drill Bit (0.8mm)

Tamiya fine drill bit 0.8 mm is a precise modeling drill bit for the finest holes in plastic, resin and soft metals.
In stock
4.36 €
TamiyaTA74095

Fine Drill Bit (1.0mm)

Tamiya Fine Drill Bit 1.0 mm is a fine modeling drill bit for drilling accurate holes in plastic, resin and thin metal. It is not a model or an accessory for a model, but a tool.
In stock
4.36 €
TamiyaTA74087

Drill Bit (1.2mm)

Tamiya drill bit 1.2 mm is a precise modeling drill bit for hand drilling holes in plastic, resin and soft metals.
In stock
3.96 €
TamiyaTA74157

HG Tweezer Grip Scissors

Tamiya HG Tweezer Grip Scissors are modeling scissors operated by squeezing the handles, suitable for decals, masks and thin plastic.
In stock
19.96 €
TamiyaTA741561:10

Modeling Template Square 1-10

Tamiya Modeling Template (squares 1-10) is a thin template with square openings from 1 to 10 mm for marking out, checking dimensions and marking on models.
In stock
7.16 €
TamiyaTA74073

CRAFT TOOLS - HARD COATED FILE PRO (HALF-ROUND 7.5MM WIDTH)

Tamiya hard-coated File Pro (half-round, 7.5 mm wide) from the Craft Tools line is a durable modeling file with a non-slip handle for sanding plastic as well as harder metal parts.
In stock
23.96 €
M4 PC Body Curved Scissors-25 %Stock ClearanceFavorite
TamiyaTA74151

M4 PC Body Curved Scissors

Tamiya curved modeling scissors for polycarbonate bodies are intended for a clean trim of thin plastic and polycarbonate parts along a complex outline.
4 leftof 7
25.16 €18.88 € You save 6.28 €
TamiyaTA74155

HG Tweezers Grip Tip

The Tamiya HG tweezers with a grip tip are precision stainless steel tweezers whose grooved tip holds small parts securely and keeps them from slipping out.
In stock
21.96 €
TamiyaTA741541:6

Rycí šablona, RR 1-6

The RR 1-6 scribing template from Tamiya is an etched steel template with rounded rectangular holes for accurate scribing and marking out of hatches and panels.
In stock
7.16 €
TamiyaTA87200

Fine Lapping Film #8000 (3pcs.)

Tamiya Fine Lapping Film 8000 grit (3 pcs) is a fine abrasive film for polishing plastic and metal surfaces to a high gloss. Suitable for wet sanding.
In stock
5.96 €
TamiyaTA74147

FINE ENGRAVING BLADE 0.4MM

Tamiya engraving blade 0.4 mm is a fine carbide graver for engraving and restoring panel lines.
In stock
23.96 €
TamiyaTA74082

Fine Drill Bit (0.4mm)

Tamiya Fine Drill Bit 0.4 mm is a fine drill bit for modeling hand drilling of holes in plastic, wood and aluminum.
In stock
3.56 €
TamiyaTA87094

Finishing Abrasives P320 (3pcs)

Tamiya Finishing Abrasives P320 is a set of three P320-grit sandpaper sheets for finer modeling sanding of plastic, metal and wood, dry or wet.
In stock
1.56 €
TamiyaTA87093

Finishing Abrasives P240 (3pcs)

Tamiya Finishing Abrasives P240 is a set of three sheets of abrasive paper in P240 grit for modeling work on plastic, metal and wood, dry as well as wet.
In stock
1.56 €
TamiyaTA87092

Finishing Abrasives P180 (3pcs)

Tamiya Finishing Abrasives P180 is a set of three sheets of abrasive paper in P180 grit for modeling work on plastic, metal and wood, dry as well as wet.
In stock
1.56 €
TamiyaTA74148

Fine Engraving Needle 20st.

A fine Tamiya engraving needle for restoring panel lines that have disappeared during the sanding of joints and filling.
In stock
17.56 €
Needle Nose W/Cutter II-25 %Stock ClearanceFavorite
TamiyaTA74146

Needle Nose W/Cutter II

Tamiya Needle Nose with Cutter II are modeling pliers with long slender jaws of chrome vanadium steel and a cutting edge at the joint. They serve for gripping, bending and cutting wire.
Last one!of 2
33.96 €25.48 € You save 8.48 €
CRAFT SPATULA 20MM-25 %Stock ClearanceFavorite
TamiyaTA87112

CRAFT SPATULA 20MM

Tamiya Craft Spatula 20 mm is a modeling spatula with a 20 mm working width made of tough POM plastic. It serves for mixing and applying texture pastes, epoxy and putties.
Last one!of 6
2.36 €1.76 € You save 0.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.